Materials for protecting structures and wood-based materials from fire, mold, rot, fungus, and wood-boring insects.
Wood protection
Visual application control
Extend the service life of wooden surfaces
Suitable for interior
and exterior work
and exterior work
Antiseptic properties against mold and fungi
For interior and exterior use
Protection against ignition and flame spread
Visual application control
Wood protection WOOD EXPERT
Packaging:
Agent for protection against fire, rot, mold and fungus, wood-boring insects
Download specifications
Purpose:
Fire and bio-protection — a means of protection against fire, rot, blue stain, mold and fungus, wood-boring insects in conditions of hygroscopic and condensation moisture without contact with the ground, exposure to atmospheric precipitation, or soil moisture.
I (highest) group of fire-retardant efficiency according to GOST 53 292–2009.
Substrate type:
*Machine application is possible on a surface already treated with the same composition. Depends on the type of wood and its surface quality.
Total consumption to ensure fire-retardant properties for Group I (fire-retardant wood):
At least 500 g/sq.m*
Consumption to ensure fire-retardant properties for Group II (flame-resistant wood) and bio-protection:
At least 250 g/cu.m*
Palette:
Red
Fire and bio-protection — a means of protection against fire, rot, blue stain, mold and fungus, wood-boring insects in conditions of hygroscopic and condensation moisture without contact with the ground, exposure to atmospheric precipitation, or soil moisture.
I (highest) group of fire-retardant efficiency according to GOST 53 292–2009.
Substrate type:
- New and previously antiseptic-treated wooden rafters, beams, battens, trusses, floors, cladding, partitions, walls, and other sawn, planed, chopped structural elements for residential, public, industrial, and agricultural purposes.
- Burning
- Ignition
- Flame spread
- Rot
- Mold
- Blue stain
- Wood-boring insects
- Universal, provides two groups of fire protection with a single material
- Converts wood into fire-retardant, flame-resistant material
- Slightly tints the wood to accelerate work quality control
- Preserves texture, does not prevent the wood from breathing
- Does not degrade the strength characteristics of the treated wood
- Stops bio-deterioration that has already begun
- Manual (brush, roller)
- Machine (sprayer)*
- Immersion
- Soaking
- Autoclaving
*Machine application is possible on a surface already treated with the same composition. Depends on the type of wood and its surface quality.
Total consumption to ensure fire-retardant properties for Group I (fire-retardant wood):
At least 500 g/sq.m*
Consumption to ensure fire-retardant properties for Group II (flame-resistant wood) and bio-protection:
At least 250 g/cu.m*
Palette:
Red
Composition:
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire protection properties according to Group I (fire-resistant wood):
At least 500 g/sq.m*
Consumption to ensure fire protection properties according to Group II (flame-retardant wood) and bioprotection:
At least 250 g/sq.m*
Drying time between layers:
20-40 minutes
Full drying:
After 24 hours
Bioprotection period:
20 years (under roofing)
Fire and bioprotection period:
10 years
GOST compliance:
I (highest) group of fire protection efficiency according to GOST 53292-2009
*Consumption depends on operating conditions and the required service life of the treated wood. All stated quality indicators and recommendations are correct for an ambient temperature of +20°C and relative air humidity of 60%. In other conditions, the technical characteristics of the material may differ from those specified.
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire protection properties according to Group I (fire-resistant wood):
At least 500 g/sq.m*
Consumption to ensure fire protection properties according to Group II (flame-retardant wood) and bioprotection:
At least 250 g/sq.m*
Drying time between layers:
20-40 minutes
Full drying:
After 24 hours
Bioprotection period:
20 years (under roofing)
Fire and bioprotection period:
10 years
GOST compliance:
I (highest) group of fire protection efficiency according to GOST 53292-2009
*Consumption depends on operating conditions and the required service life of the treated wood. All stated quality indicators and recommendations are correct for an ambient temperature of +20°C and relative air humidity of 60%. In other conditions, the technical characteristics of the material may differ from those specified.
Purpose and scope of application
Fire and bio-protection — a means of protection against fire, rot, mold and mildew, and wood-boring insects.
For application on new and previously antiseptic-treated wooden rafters, beams, battens, trusses, floors, cladding, partitions, walls, and other sawn, planed, and chopped structural elements for residential, public, industrial, and agricultural purposes.
Protection against:
Fire and bio-protection — a means of protection against fire, rot, mold and mildew, and wood-boring insects.
For application on new and previously antiseptic-treated wooden rafters, beams, battens, trusses, floors, cladding, partitions, walls, and other sawn, planed, and chopped structural elements for residential, public, industrial, and agricultural purposes.
Protection against:
- Burning
- Ignition
- Flame spread
- Rot
- Mold
- Blue stain
- Wood-boring insects
Available in a fixed color palette:
red
red
Substrate preparation
- The substrate must be cleaned of dirt, dust, bark, bast, and other coatings. Surfaces previously painted with enamels, paints, and other paint materials must be sanded to restore the wood's absorption capacity.
- In case of severe bio-contamination, it is recommended to pre-treat with bio-protective compounds.
- Application is possible by brush, roller, immersion, or pneumatic sprayer (second and subsequent layers) at an air temperature of at least +10 °C and wood moisture content of no more than 15%.
- Do not use on surfaces previously coated with drying oil, paint, varnish, or other film-forming or water-repellent materials.
- It is recommended to perform work at a temperature not lower than +10°C.
- Before starting work, the fire and bio-protection agent should be stirred in the factory container. The product is ready for use.
- The material is applied to the substrate in 2-3 passes using a brush, roller, or sprayer with an interval of 20-40 minutes, ensuring the standardized total consumption to provide fire-retardant properties in accordance with the required group.
- Do not treat frozen wood! Do not mix with other compounds.
Storage and transportation conditions
Store and transport in the manufacturer's hermetically sealed containers separately from food products. Properties are preserved after thawing and stirring. Guaranteed shelf life in factory packaging is 36 months. Storage temperature from +5°C to +30°C.
Manufacturer's liability
The manufacturer bears no responsibility for failure to comply with the technology of working with the material, for its use for purposes and under conditions not provided for by these instructions, as well as in the case of introducing foreign components and substances into the product composition.
Store and transport in the manufacturer's hermetically sealed containers separately from food products. Properties are preserved after thawing and stirring. Guaranteed shelf life in factory packaging is 36 months. Storage temperature from +5°C to +30°C.
Manufacturer's liability
The manufacturer bears no responsibility for failure to comply with the technology of working with the material, for its use for purposes and under conditions not provided for by these instructions, as well as in the case of introducing foreign components and substances into the product composition.