Primers for preparing the substrate for subsequent finishing.
Primers
Improve adhesion
Ensure even application
of topcoats
of topcoats
Reduce consumption
of finishing materials
of finishing materials
Protects against mold and mildew
Reduces paint consumption by up to 10%
Strengthens the surface
Increases adhesion
PRAKTIK Primer
Packaging:
Strengthening primer for painting
Download specifications
Purpose:
The primer is intended for dust removal, strengthening, and preparing the substrate for subsequent finishing (puttying, painting, wallpapering).
Substrate type:
Used for treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials.
For interior and exterior work.
Application method:
Consumption:
6−8 m²/l
Palette:
Colorless
The primer is intended for dust removal, strengthening, and preparing the substrate for subsequent finishing (puttying, painting, wallpapering).
Substrate type:
Used for treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials.
For interior and exterior work.
Application method:
- Brush
- Roller
- Spray gun
Consumption:
6−8 m²/l
Palette:
Colorless
Composition:
Polymer water dispersion, functional additives, water, biocide complex.
Color:
Colorless
Density:
1.0−1.05 kg/l
NVMS:
At least 4%
Recommended number of layers:
1−2
Consumption*:
6−8 m²/l
Drying time**:
2 hours
Air and substrates for application:
from +5 °C to +35 °C
*Material consumption depends on the quality of substrate preparation, application method, tools used, and the skill of the workers, and may differ from the specified values.
** At t (+20±2)°C and relative air humidity of no more than (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15℃ or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Polymer water dispersion, functional additives, water, biocide complex.
Color:
Colorless
Density:
1.0−1.05 kg/l
NVMS:
At least 4%
Recommended number of layers:
1−2
Consumption*:
6−8 m²/l
Drying time**:
2 hours
Air and substrates for application:
from +5 °C to +35 °C
*Material consumption depends on the quality of substrate preparation, application method, tools used, and the skill of the workers, and may differ from the specified values.
** At t (+20±2)°C and relative air humidity of no more than (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15℃ or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Used for treating concrete, plastered, gypsum, gypsum board surfaces, chipboard, and fiberboard materials.
For interior and exterior work.
The primer can be used in rooms with normal and high humidity.
Used in all types of buildings and structures (A, B, C).
For interior and exterior work.
The primer can be used in rooms with normal and high humidity.
Used in all types of buildings and structures (A, B, C).
Colorless
Substrate preparation
Substrate preparation should be carried out in accordance with SP 71.13330.2017.
The surface must be sound, clean, and dry. Before priming, it is necessary to remove flaking elements, chalk and lime whitewash, dust, and other contaminants from the surface.
If necessary, level surface irregularities with Bergauf filler, then sand the dried surface.
Work procedure
The surface to be treated must be dry and clean; the air and substrate temperature during application should be from +5°C to +35°C, and relative air humidity below 80%.
Stir until smooth before use; do not dilute.
Apply to a prepared dry, clean surface using a roller, brush, or sprayer (nozzle 0.011−0.015″, pressure no more than 150−170 bar).
It is recommended to prime highly absorbent surfaces twice.
Painting of the primed coating is recommended no earlier than 2−3 hours later, provided the temperature regime is from +5°C and relative air humidity is no more than 80%.
Safety precautions
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
Substrate preparation should be carried out in accordance with SP 71.13330.2017.
The surface must be sound, clean, and dry. Before priming, it is necessary to remove flaking elements, chalk and lime whitewash, dust, and other contaminants from the surface.
If necessary, level surface irregularities with Bergauf filler, then sand the dried surface.
Work procedure
The surface to be treated must be dry and clean; the air and substrate temperature during application should be from +5°C to +35°C, and relative air humidity below 80%.
Stir until smooth before use; do not dilute.
Apply to a prepared dry, clean surface using a roller, brush, or sprayer (nozzle 0.011−0.015″, pressure no more than 150−170 bar).
It is recommended to prime highly absorbent surfaces twice.
Painting of the primed coating is recommended no earlier than 2−3 hours later, provided the temperature regime is from +5°C and relative air humidity is no more than 80%.
Safety precautions
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
Store and transport in tightly closed containers at temperatures from +5°C to +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at temperatures no lower than -40°C. Protect the product bucket from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture. Separation of the product may occur during storage, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion-proof and does not contain flammable components.
Disposal
Do not pour paint products into sewers, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.
The product is fire and explosion-proof and does not contain flammable components.
Disposal
Do not pour paint products into sewers, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.