Interior paints, decorative plasters and textured coatings for painting walls, ceilings, partitions and other indoor surfaces.
PAINTS AND COATINGS FOR INTERIOR WORK
A wide range of products to bring your ideas to life
Materials for rooms with normal and high humidity
Tinting in thousands of colors according to RAL, NCS and other color catalogs
Computer tinting
Economical consumption
Easy and even application
Resistant to steam and condensation
Vapor-permeable
PRAKTIK paint. Kitchens and dining rooms
Packaging:
Moisture-resistant paint for interior work
Download specifications
Purpose:
The paint is intended for painting walls and ceilings in rooms with normal and varying humidity (kitchens, dining rooms, corridors) with moderate operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a moisture-resistant coating resistant to water vapor and condensation, and light wet cleaning without the use of detergents and abrasive agents. Ready to use.
Substrate type:
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, plank wood surfaces, chipboard, fiberboard, fiberglass, and smooth non-woven wallpaper.
For interior work.
Application method:
8−11 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL and other tinting systems.
The paint is intended for painting walls and ceilings in rooms with normal and varying humidity (kitchens, dining rooms, corridors) with moderate operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a moisture-resistant coating resistant to water vapor and condensation, and light wet cleaning without the use of detergents and abrasive agents. Ready to use.
Substrate type:
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, plank wood surfaces, chipboard, fiberboard, fiberglass, and smooth non-woven wallpaper.
For interior work.
Application method:
- Brush
- Roller
- Spray gun
8−11 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL and other tinting systems.
Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
Base A — white
Base C — transparent
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
8−11 m²/kg
Density:
Base A 1.55−1.6 kg/l
Base C 1.26−1.3 kg/l
Drying time "touch dry"**:
1 hour
The next coat can be applied after**:
1.5 hours**
Wet abrasion resistance GOST 32 300/ DIN EN 13 300:
Class 4
Wash resistance:
Light wet cleaning without the use of detergents
Air and substrates for application:
+5 °C to 35 °C
* Material consumption depends on the quality of preparation and the absorption capacity of the substrate, the application method, the tool used, the qualification of the workers and may differ from the specified values.
** At t (+20±2)°C and relative air humidity not exceeding (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
Base A — white
Base C — transparent
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
8−11 m²/kg
Density:
Base A 1.55−1.6 kg/l
Base C 1.26−1.3 kg/l
Drying time "touch dry"**:
1 hour
The next coat can be applied after**:
1.5 hours**
Wet abrasion resistance GOST 32 300/ DIN EN 13 300:
Class 4
Wash resistance:
Light wet cleaning without the use of detergents
Air and substrates for application:
+5 °C to 35 °C
* Material consumption depends on the quality of preparation and the absorption capacity of the substrate, the application method, the tool used, the qualification of the workers and may differ from the specified values.
** At t (+20±2)°C and relative air humidity not exceeding (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Purpose and properties
The paint is designed for painting walls and ceilings in rooms with normal and varying humidity (kitchens, dining rooms, corridors) with moderate operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a moisture-resistant coating that is resistant to water vapor and condensation, and withstands light wet cleaning without the use of detergents or abrasive agents. It is easy to apply and rolls out without splashing or sagging.
Vapor permeable.
Economical consumption.
Can be tinted in pastel and saturated colors.
Scope of application
The paint can be applied to new and previously water-dispersion painted drywall; plastered, filled, concrete, and brick surfaces, planked wooden surfaces, chipboard, fiberboard, fiberglass, and smooth painter's non-woven fabric.
For interior work.
Dor manual and mechanized application.
Used in all types of buildings and structures (A, B, C).
The paint is designed for painting walls and ceilings in rooms with normal and varying humidity (kitchens, dining rooms, corridors) with moderate operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a moisture-resistant coating that is resistant to water vapor and condensation, and withstands light wet cleaning without the use of detergents or abrasive agents. It is easy to apply and rolls out without splashing or sagging.
Vapor permeable.
Economical consumption.
Can be tinted in pastel and saturated colors.
Scope of application
The paint can be applied to new and previously water-dispersion painted drywall; plastered, filled, concrete, and brick surfaces, planked wooden surfaces, chipboard, fiberboard, fiberglass, and smooth painter's non-woven fabric.
For interior work.
Dor manual and mechanized application.
Used in all types of buildings and structures (A, B, C).
The paint is produced in two bases: A (pastel colors) and C (saturated colors) and can be tinted by computer (machine) method into RAL, NCS and other color catalogs. Manual tinting using water-based tinting pastes is possible. Base A can be used as white paint, base C is used only in tinted form.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may slightly differ from those presented in the color catalog.
Before application, it is necessary to perform a test application and check the dried coating for color compliance.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may slightly differ from those presented in the color catalog.
Before application, it is necessary to perform a test application and check the dried coating for color compliance.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
SUBSTRATE PREPARATION
Substrate preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate from dust and dirt. Remove unstable layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte state, and remove the sanding dust. Level unevenness, depressions, cracks, and chips with Bergauf putty, Bergauf, sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with Praktik strengthening primer for painting to increase coating reliability and reduce paint consumption.
WORK PROCEDURE
Mix the paint thoroughly. The paint is ready for use; if necessary, dilution with water of no more than 5% is possible. Apply the paint to a prepared dry clean surface with a roller, brush, or spray gun in two layers. For rough surfaces (textured plasters, brick, concrete blocks, relief ceilings), it is recommended to use rollers with a pile length of 12−25 mm. For coarse surfaces (putties, plasters, concrete) — with a pile length of 8−12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5−10% is allowed, nozzle 0.013−0.015″, pressure 180−190 bar. During work, avoid exposure to direct sunlight, high humidity conditions, and atmospheric precipitation. Air and substrate temperature during application from +5°C to +35°C, relative air humidity below 80%.
Upon completion of work, wash hands and tools thoroughly with warm water.
SAFETY PRECAUTIONS
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
Substrate preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate from dust and dirt. Remove unstable layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte state, and remove the sanding dust. Level unevenness, depressions, cracks, and chips with Bergauf putty, Bergauf, sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with Praktik strengthening primer for painting to increase coating reliability and reduce paint consumption.
WORK PROCEDURE
Mix the paint thoroughly. The paint is ready for use; if necessary, dilution with water of no more than 5% is possible. Apply the paint to a prepared dry clean surface with a roller, brush, or spray gun in two layers. For rough surfaces (textured plasters, brick, concrete blocks, relief ceilings), it is recommended to use rollers with a pile length of 12−25 mm. For coarse surfaces (putties, plasters, concrete) — with a pile length of 8−12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5−10% is allowed, nozzle 0.013−0.015″, pressure 180−190 bar. During work, avoid exposure to direct sunlight, high humidity conditions, and atmospheric precipitation. Air and substrate temperature during application from +5°C to +35°C, relative air humidity below 80%.
Upon completion of work, wash hands and tools thoroughly with warm water.
SAFETY PRECAUTIONS
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
Store and transport in tightly closed containers at temperatures from +5°C to +35°C. Five-fold freezing for a total duration of no more than 2 weeks at a temperature not lower than -40°C is allowed. The product bucket should be protected from excessive heating and storage under direct sunlight should be avoided. Subject to storage conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture. During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion-proof and does not contain flammable components.
DISPOSAL
Do not pour paint products into sewers, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.
The product is fire and explosion-proof and does not contain flammable components.
DISPOSAL
Do not pour paint products into sewers, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.