Purpose:
Paint for tiles, PVC, and concrete.

Substrate type:

• Ceramic tiles
• Porcelain stoneware
• PVC
• Laminate, linoleum
• Previously painted or varnished wood
• Natural stone
• Concrete and any mineral substrates

Application method:

• Brush
• Roller
• Spray gun

Consumption:
8-12 m²/l

Gloss level:
Semi-matte (10-20%)

Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually or by computer (machine) method into RAL, NCS, and other color catalogs.

Composition:
Modified dispersion of styrene-acrylic copolymer, titanium dioxide, fillers, biocides, functional additives, water.

Color:
Base A — white; Base C — transparent

Gloss level:
Semi-matte (10-20%)

Consumption per 1 coat:
8-12 m²/l*

Drying time:
1 hour**

Intercoat drying time:
2-3 hours**

Wash resistance:
Wet cleaning with non-abrasive detergents.

Resistance to wet abrasion GOST 32 300/ DIN EN 13 300:
Class 1

Substrate temperature during application:
+5 °C to 35 °C

Shelf life:
24 months

* Material consumption depends on the quality of the substrate preparation, the application method, the tool used, the qualification of the workers, and may differ from the specified values.
** At t (+20±2)°C and relative air humidity of no more than (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next layer no earlier than after 24 hours.

Semi-matte universal water-based paint for interior work, specially developed for painting complex smooth surfaces. Provides a durable and elastic coating resistant to moisture and
mechanical damage. It possesses high adhesion and antibacterial protection.
Ideal for interior renovation, including wet rooms (bathroom, kitchen).

Scope of application
Used for painting ceramic tiles, porcelain stoneware, PVC, laminate, linoleum, previously painted or varnished wood, natural stone, concrete, and any mineral substrates.

The paint is produced in two bases, A and C, and can be tinted using a computer (machine) method into RAL, NCS, and other color catalogs. Base A is intended for tinting into light and pastel shades; it can also be used as a white paint, with up to 5% tinting pastes by weight of the paint allowed to be added.
Base C is used only in tinted form and is intended for tinting into saturated shades; it is permissible to add up to 10% tinting pastes by weight of the paint. When painting in bright colors using Base C, it is recommended to first apply a layer of Base A paint tinted in a similar shade. Manual tinting using water-based tinting pastes is possible.
The organization performing the tinting bears responsibility for the tinting result. Depending on the application conditions and the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog.
Before application, it is necessary to perform a test application and check the dried coating for color compliance.
To avoid differences in shade, it is recommended to use a product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology
must remain unchanged.

Surface preparation:

• Clean the substrate from dust and dirt. Remove loose layers of old paint and whitewash from previously painted surfaces. Level irregularities, depressions, cracks, and chips with water-dispersion putty and sand them down.
• Pre-wash the surface to be painted with water and detergents, paying particular attention to cleaning the joints on ceramic tiles, then dry the surface. If mold is present on the surface, treat it with an antiseptic agent. It is recommended to pre-sand and degrease smooth high-gloss, shiny surfaces to improve adhesion.
• Intensively absorbent mineral surfaces should be pre-primed with Bergauf Techno Primer deep penetration primer to increase coating reliability and reduce paint consumption.

Work procedure:
The surface to be painted must be dry and clean; the air and substrate temperature for the work must be between +5°C and +35°C, and the relative humidity must be below 80%.
Stir the paint thoroughly before use.
Stirring should be done with a wide, flat slat or a construction mixer at low speeds, carefully, avoiding the formation of air bubbles, for 1−3 minutes. It is not recommended to mix
the material by shaking the closed can. After transportation and/or active stirring, if air bubbles appear, the paint needs to settle until they disappear. Apply to a prepared dry clean surface with a brush, roller or spray gun,
thoroughly painting over irregularities and corners in 1−2 layers.
For smooth surfaces, it is recommended to use rollers with a pile length of up to 6 mm. If necessary, dilute with clean water, no more than 5% of the paint volume.
To avoid differences in the shade of the finish coat, it is recommended to use paint from the same batch or mix the required amount in one container.
Upon completion of work, wash hands and tools thoroughly with warm water.

Safety precautions
Do not mix with other paints or solvents.
Work should be carried out using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water. Keep out of reach of children!

Store and transport in tightly closed containers at temperatures from +5°C to +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature not lower than -40°C. The product bucket should be protected from excessive heat and storage under direct sunlight should be avoided. Subject to these conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion-proof and does not contain flammable components.