Silicone, silicate and complex adhesion Bergauf paints for facades, plinths and any other exterior surfaces.
Paints and coatings for exterior work
Paints are tested for compatibility within the system
Provide an excellent combination of durability and aesthetics
Reliably protect against moisture, sun and sudden temperature changes
For interior and exterior use
Wear resistance
Deep matte snow-white
High hiding power
MINERAL TECHNO water-dispersion acrylic paint for facade work
Packaging:
Facade water-dispersion acrylic paint
Download specifications
Purpose:
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
Application method:
Consumption:
4−8 m²/l
Gloss level:
Deep matte
Tinting:
The paint is produced in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) in RAL, NCS, and other color catalogs.
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
- Concrete, reinforced concrete
- Cement plasters
- Cement-lime and lime plasters
- Mineral and acrylic decorative plasters
- Non-glossy construction ceramics
- Firmly adhering coatings previously painted with water-dispersion or perchlorovinyl paints
Application method:
- Brush
- Roller
- Spray gun
Consumption:
4−8 m²/l
Gloss level:
Deep matte
Tinting:
The paint is produced in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) in RAL, NCS, and other color catalogs.
Composition:
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep matte
Consumption per 1 coat on non-absorbent surfaces:
6 - 8 m²/l*
Consumption per 1 coat on absorbent surfaces:
4 - 6 m²/l*
Drying time:
1 hour**
Next coat can be applied after:
12 hours**
Substrate temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)℃ and relative air humidity not exceeding (65±5)%. Drying time may increase at air temperatures below +15 ℃ and relative air humidity above 65% - apply the next coat no earlier than after 24 hours.
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep matte
Consumption per 1 coat on non-absorbent surfaces:
6 - 8 m²/l*
Consumption per 1 coat on absorbent surfaces:
4 - 6 m²/l*
Drying time:
1 hour**
Next coat can be applied after:
12 hours**
Substrate temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)℃ and relative air humidity not exceeding (65±5)%. Drying time may increase at air temperatures below +15 ℃ and relative air humidity above 65% - apply the next coat no earlier than after 24 hours.
Facade acrylic paint is designed for painting mineral facades and plinths, as well as for rooms with normal and high humidity. On building plinths, capillary moisture suction from the substrate side must be excluded.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
The paint is produced in 2 bases—A and C. Tinting is possible using water-based tinting pastes. Base A is intended for tinting into light and pastel shades and can also be used as white paint. Base C is used only in tinted form and is intended for tinting into saturated shades.
When painting in bright colors using Base C, it is recommended to first apply a coat of Base A paint tinted to a similar shade. Paint tinting can be carried out in accordance with NCS, RAL, and other tinting systems.
To avoid differences in shade on the same surface, use products with the same batch number (see packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color matching.
When painting in bright colors using Base C, it is recommended to first apply a coat of Base A paint tinted to a similar shade. Paint tinting can be carried out in accordance with NCS, RAL, and other tinting systems.
To avoid differences in shade on the same surface, use products with the same batch number (see packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color matching.
Surface preparation
- Clean the surface of dust, dirt, efflorescence, and oil stains. Remove loose paint and plaster using a sandblaster, hydro-sandblaster, or a steel brush. Heavily chalking and unstable surfaces must be cleared down to a solid base mechanically or by pressure washing.
- Level surface defects with an appropriate repair mortar. In case of surface infestation by fungus or mold, treat with a sanitizing agent, following the relevant instructions.
- New concrete surfaces can be painted after one heating season, new plastered surfaces after 1–2 months, and new fiber cement boards after 6 months. Glossy concrete surfaces (cement laitance) should be treated with a sandblaster or a steel brush to create a profile suitable for painting.
- Open any cracks in the reinforced concrete structure by scraping or using a grinding machine with a disc and flange. Clean exposed metal from rust and protect it with anti-corrosion paint.
- Before application, treat the surface with an appropriate primer from the Bergauf line — Bergauf Tiefgrunt, Bergauf Techno Primer, or Bergauf Aqua Grunt (diluted, choose the concentration level depending on the type of substrate).
- The surface must be dry, clean, and primed before painting. Apply the paint at a temperature not lower than +5°C and relative air humidity not exceeding 80%. It is forbidden to carry out work in hot weather, in strong winds, under direct sunlight, or during rain.
- Stir the paint thoroughly before use. Dilution with water is permitted in an amount of no more than 5% of the material weight. Apply evenly to the prepared surface in 2 layers using a brush, roller, or spray gun.
- To avoid differences in shade, use paint from the same batch. It is recommended not to take breaks when painting a continuous surface; work using the "wet-on-wet" method at overlap points. Work should be finished at architectural boundaries (at the corners of the building, under downspouts, etc.).
Storage and transportation conditions
Store and transport in tightly closed containers at temperatures of no less than +5°C and no more than +40°C. Protect the bucket containing the product from excessive heat and avoid storage under direct sunlight. Subject to these conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
Safety
The product is fire and explosion-proof and does not contain flammable components.
Store and transport in tightly closed containers at temperatures of no less than +5°C and no more than +40°C. Protect the bucket containing the product from excessive heat and avoid storage under direct sunlight. Subject to these conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
Safety
The product is fire and explosion-proof and does not contain flammable components.