Enamels for protection and decorative painting of wooden, metal, and concrete surfaces.
Enamels
Form a coating with high wear resistance
Suitable for interior and exterior work
Weather resistance
For exterior and interior work
High wear resistance and opacity
Enamel PF-115
Packaging:
Alkyd enamel for wooden, metal, and concrete surfaces
Download specifications
Purpose:
Alkyd enamel PF-115 "Bergauf" is designed for painting wooden, metal, and plastered surfaces used in atmospheric conditions and indoors. The coating is wear-resistant, resistant to atmospheric phenomena and detergent disinfectants.
Substrate type:
Wooden, metal, plastered surfaces
Application method:
Brush, roller, spray gun
Consumption:
8−12 m²/l
Palette:
White, bright blue, yellow, brown, light gray, blue, pistachio, black, bright green
Alkyd enamel PF-115 "Bergauf" is designed for painting wooden, metal, and plastered surfaces used in atmospheric conditions and indoors. The coating is wear-resistant, resistant to atmospheric phenomena and detergent disinfectants.
Substrate type:
Wooden, metal, plastered surfaces
Application method:
Brush, roller, spray gun
Consumption:
8−12 m²/l
Palette:
White, bright blue, yellow, brown, light gray, blue, pistachio, black, bright green
Composition:
Alkyd resin, pigments, fillers, additives, solvent
Color:
White, bright blue, yellow, brown, light gray, blue, pistachio, black, bright green
Film gloss according to photoelectric gloss meter:
Not less than 60%
Consumption per 1 layer:
8 — 12 sq.m./l*
Drying time:
After 24 hours**
GOST compliance:
6465-2023
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions during painting.
**At t +20±2ºС and relative air humidity of no more than 50%.
Alkyd resin, pigments, fillers, additives, solvent
Color:
White, bright blue, yellow, brown, light gray, blue, pistachio, black, bright green
Film gloss according to photoelectric gloss meter:
Not less than 60%
Consumption per 1 layer:
8 — 12 sq.m./l*
Drying time:
After 24 hours**
GOST compliance:
6465-2023
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions during painting.
**At t +20±2ºС and relative air humidity of no more than 50%.
Alkyd enamel PF-115 "Bergauf" is designed for painting wooden, metal, and plastered surfaces used in atmospheric conditions and indoors. The coating is wear-resistant, resistant to atmospheric phenomena and detergent disinfectants.
Available in a fixed color palette: White, bright blue, yellow, brown, light gray, blue, pistachio, black, bright green
Palette Surface preparation:
Stir the enamel thoroughly before use; if necessary, dilute with white spirit. Apply by brush, roller, or spray gun.
Pre-clean the surface to be painted from dirt, rust, and peeling old paint, then degrease and dry. Before painting, it is recommended to treat the surface with GF-021 "Bergauf" primer.
Stir the enamel thoroughly before use; if necessary, dilute with white spirit. Apply by brush, roller, or spray gun.
Pre-clean the surface to be painted from dirt, rust, and peeling old paint, then degrease and dry. Before painting, it is recommended to treat the surface with GF-021 "Bergauf" primer.
Storage and transportation conditions
Store in the original tightly closed packaging in a cool place and out of reach of children. Guaranteed shelf life is 24 months.
Disposal
Do not drain into sewers, water bodies, or onto the ground. After the enamel residues in the can have completely dried, it can be disposed of in a tightly closed container as household or construction waste.
Store in the original tightly closed packaging in a cool place and out of reach of children. Guaranteed shelf life is 24 months.
Disposal
Do not drain into sewers, water bodies, or onto the ground. After the enamel residues in the can have completely dried, it can be disposed of in a tightly closed container as household or construction waste.