Materials for protecting buildings and materials made of wood from fire, mold, rot, fungus, and wood-boring insects.
Wood protection
Visual control of application
Extend the service life of wooden surfaces
Suitable for interior
and exterior works
and exterior works
Antiseptic properties against mold and fungi
For interior and exterior works
Protection against fire and flame spread
Visual control of application
WOOD EXPERT wood protection
Packaging:
Agent for protection against fire, rot, mold and fungus, wood-boring insects
Download specifications
Purpose:
Fire and bio-protection — a product for protection against fire, rot, blue stain, mold, fungus, and wood-boring insects under conditions of hygroscopic and condensation moisture without contact with soil, atmospheric precipitation, or ground moisture.
I (highest) group of fire protection efficiency according to GOST 53292–2009.
Base type:
*Machine application is possible on a surface already treated with the same compound. Depends on the type of wood and the quality of its surface.
Total consumption to ensure fire protection properties according to group I (flame-retardant wood):
Not less than 500 g/sq.m*
Consumption to ensure fire protection properties according to group II (hard-to-ignite wood) and bioprotection:
Not less than 250 g/sq.m*
Palette:
Red
Fire and bio-protection — a product for protection against fire, rot, blue stain, mold, fungus, and wood-boring insects under conditions of hygroscopic and condensation moisture without contact with soil, atmospheric precipitation, or ground moisture.
I (highest) group of fire protection efficiency according to GOST 53292–2009.
Base type:
- New and previously antiseptic-treated wooden rafters, beams, battens, trusses, ceilings, cladding, partitions, walls, and other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.
- Combustion
- Ignition
- Flame spread
- Rot
- Mold
- Blue stain
- Wood-boring insects
- Universal, provides two groups of fire protection with a single material
- Converts wood into a flame-retardant, difficult-to-ignite material
- Slightly tints the wood to facilitate quality control of the work
- Preserves the texture, does not hinder the wood's ability to breathe
- Does not impair the strength characteristics of the treated wood
- Stops already started biological damage
- Manual (brush, roller)
- Machine (sprayer)*
- Immersion
- Soaking
- Autoclaving
*Machine application is possible on a surface already treated with the same compound. Depends on the type of wood and the quality of its surface.
Total consumption to ensure fire protection properties according to group I (flame-retardant wood):
Not less than 500 g/sq.m*
Consumption to ensure fire protection properties according to group II (hard-to-ignite wood) and bioprotection:
Not less than 250 g/sq.m*
Palette:
Red
Composition:
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire protection properties according to group I (combustion-resistant wood):
At least 500 g/sq.m*
Consumption to ensure fire protection properties according to group II (flame-retardant wood) and bioprotection:
At least 250 g/sq.m*
Drying time between coats:
20-40 minutes
Full drying time:
After 24 hours
Bioprotection period:
20 years (under roofing)
Fire and bioprotection period:
10 years
GOST compliance:
I (highest) group of fire protection efficiency according to GOST 53292-2009
*Consumption depends on operating conditions and the required service life of the treated wood. All stated quality indicators and recommendations are valid for an ambient temperature of +20°C and a relative humidity of 60%. Under other conditions, the technical characteristics of the material may differ from those specified.
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire protection properties according to group I (combustion-resistant wood):
At least 500 g/sq.m*
Consumption to ensure fire protection properties according to group II (flame-retardant wood) and bioprotection:
At least 250 g/sq.m*
Drying time between coats:
20-40 minutes
Full drying time:
After 24 hours
Bioprotection period:
20 years (under roofing)
Fire and bioprotection period:
10 years
GOST compliance:
I (highest) group of fire protection efficiency according to GOST 53292-2009
*Consumption depends on operating conditions and the required service life of the treated wood. All stated quality indicators and recommendations are valid for an ambient temperature of +20°C and a relative humidity of 60%. Under other conditions, the technical characteristics of the material may differ from those specified.
Purpose and scope of application
Fire and bioprotection — a product for protection against fire, rot, mold, fungus, and wood-boring insects.
For application on new and previously antiseptic-treated wooden rafters, beams, battens, trusses, ceilings, sheathing, partitions, walls, and other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.
Protection against:
Fire and bioprotection — a product for protection against fire, rot, mold, fungus, and wood-boring insects.
For application on new and previously antiseptic-treated wooden rafters, beams, battens, trusses, ceilings, sheathing, partitions, walls, and other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.
Protection against:
- Combustion
- Ignition
- Flame spread
- Rot
- Mold
- Blue stain
- Wood-boring insects
Available in a fixed color palette:
red
red
Surface preparation
- The substrate must be cleaned of dirt, dust, bark, bast, and other coatings. Surfaces previously painted with enamels, paints, or other paint and varnish materials must be sanded to restore the wood's absorbency.
- In case of severe biological contamination, it is recommended to pre-treat with bioprotective compounds.
- Application is possible by brush, roller, immersion, or pneumatic sprayer (for the second and subsequent layers) at an air temperature of no less than +10 °C and wood moisture of no more than 15%.
- Do not apply to surfaces previously covered with drying oil, paint, varnish, or other film-forming or water-repellent materials.
- It is recommended to perform work at a temperature not lower than +10°C.
- Before starting work, the fire and bioprotection agent should be mixed in the original container. The product is ready for use.
- The material is applied to the base in 2-3 coats using a brush, roller, or sprayer at intervals of 20-40 minutes, ensuring the specified total consumption to achieve fire-retardant properties in accordance with the required group.
- Do not treat frozen wood! Do not mix with other compounds.
Storage and transportation conditions
Store and transport in the manufacturer's tightly closed container, separate from food products. Properties are preserved after thawing and mixing. The shelf life in the original packaging is 36 months. Storage temperature is from +5°C to +30°C.
Manufacturer's liability
The manufacturer is not liable for failure to follow the material application technology, for its use in purposes and conditions not provided for by this instruction, or in the event of adding foreign components and substances to the product composition.
Store and transport in the manufacturer's tightly closed container, separate from food products. Properties are preserved after thawing and mixing. The shelf life in the original packaging is 36 months. Storage temperature is from +5°C to +30°C.
Manufacturer's liability
The manufacturer is not liable for failure to follow the material application technology, for its use in purposes and conditions not provided for by this instruction, or in the event of adding foreign components and substances to the product composition.