Purpose:
Bio-protection is a product for protection against rot, mold, blue stain, and wood-boring insects under conditions of direct exposure to atmospheric precipitation, soil moisture, hygroscopic and condensation moisture, and contact with the ground, both as an independent treatment and as a bio-protective primer under paint and varnish coatings.

Type of substrate:

• New and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, flooring, fences, enclosures, and other sawn, planed, or hewn structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rot
• Mold
• Blue stain
• Wood-boring insects

Properties:

• Difficult to wash out – chemically bonds with the wood
• Creates 3 levels of biological protection in the wood
• Penetrates wood well, does not increase its hygroscopicity
• Does not impair the strength, glueability, or paintability of the wood
• Has low corrosive aggressiveness towards ferrous metals
• Preserves the texture, does not hinder the wood's ability to breathe
• Stops biological damage that has already begun

Method of application:

• Manual (brush, roller with synthetic pile)
• Machine (spray gun)*

*Machine application is possible on a surface already treated with the same compound. Depends on the type of wood and the quality of its surface.

Total consumption when applied by brush, roller, or sprayer:
At least 250-300 g/sq.m*

Consumption for soaking or autoclaving:
60-80 kg/cubic meter*

Palette:
Yellow shades

Composition:
Hard-to-wash-out antiseptic, target additives, water

Color:
Yellow shades

Drying time between coats:
20-40 minutes

Resistance to leaching after:
2-3 days**

Bioprotection period:
30-35 years in moderate conditions***

Total consumption when applied by brush, roller, or sprayer:
At least 250-300 g/sq.m*

Consumption for soaking or autoclaving:
60-80 kg/cubic meter*

*Consumption depends on operating conditions and the required service life of the treated wood.
**When drying under normal conditions.
***Mathematically estimated based on the leachability test report according to GOST 50241–2021. All stated quality indicators and recommendations are valid for an ambient temperature of +20°C and a relative humidity of 60%. Under other conditions, the technical characteristics of the material may differ from those indicated.

Purpose and scope of application
Bio-protection is a product for protection against rot, mold, blue stain, and wood-boring insects under conditions of direct exposure to atmospheric precipitation, soil moisture, hygroscopic and condensation moisture, and contact with the ground, both as an independent treatment and as a bio-protective primer under paint and varnish materials. It is a hard-to-wash-out antiseptic that chemically bonds with the wood. It penetrates the wood well and does not increase its hygroscopicity. It does not impair the strength, glueability, or paintability of the wood. It has low corrosive aggressiveness towards ferrous metals.
For application to new and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, decking, fences, enclosures, and other sawn, planed, or hewn structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rot
• Mold
• Blue stain
• Wood-boring insects

Available in a fixed color palette:
Yellow shades

Storage and transportation conditions
Store and transport in the manufacturer's tightly closed container at temperatures from +5°C to +35°C, separately from food products. After thawing and stirring, the properties are preserved. Shelf life is 36 months.

Manufacturer's liability
The manufacturer is not liable for failure to follow the material application technology, for its use for purposes and in conditions not provided for by this instruction, as well as in the case of adding foreign components and substances to the product composition.