Purpose:
Primer for interior and exterior use. Designed for dust removal and preparation of the substrate for subsequent finishing (puttying, painting, wallpapering, laying floor coverings).

Use before applying:

• Putty
• Paint
• Wallpaper
• Floor coverings

Substrate type:

• Concrete
• Plaster, putty
• Drywall
• Fiberboard, chipboard

Application method:

• Brush
• Roller
• Spray gun

Consumption:
8-12 m²/l

Palette:
colorless

Composition:
Polymer aqueous dispersion, functional additives, water, biocide.

Color:
Colorless

Appearance in container:
Opaque white liquid

Film color:
Colorless

Non-volatile matter content:
Not less than 5%

Consumption*:
8−10 m²/l

Density:
about 1.0 kg/l

Recommended number of layers:
1−2

Drying time**:
2 hours

Surface temperature during application:
from +5 °C to +35 °C

Operating temperature:
from -50 °C to +70 °C

Transportation temperature:
from +5 °C to +35 °C

Shelf life:
24 months

* Material consumption depends on the quality of surface preparation and the method of application.
** at t (+20±2) °C and relative air humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, the next coat should be applied no earlier than 24 hours later.

Used for treating concrete, plastered, gypsum, and drywall surfaces, as well as particle board and fiberboard materials. The primer can be used in rooms with normal and high humidity. A high-quality primer for interior and exterior work. Designed for dust removal and preparing the substrate for subsequent finishing (puttying, painting, wallpapering, laying floor coverings). It strengthens the surface and reduces and evens out the absorbency of the substrate. Increases adhesion and reduces paint consumption by up to 15%. Protects against mold and mildew.

Available in a fixed color palette: colorless

Surface preparation:

Surface preparation should be carried out in accordance with SP 71.13330.2017.
The surface must be solid, clean and dry. Before priming, it is necessary to
remove peeling elements, chalk and lime whitewash from the surface,
dust and other contaminants. If necessary, fill in surface irregularities, then sand the dried surface.

Work procedure:

1. The surface to be treated must be dry and clean, the base temperature for work should be from +5°C, the room temperature during paint application should be from +5°C to +35°C, and the relative humidity should be below 80%.
2. Stir until homogeneous before use, do not dilute.
3. Apply to a prepared, dry, clean surface with a roller, brush, or spray gun (nozzle 0.28 mm, pressure no more than 150–170 bar).
4. It is recommended to prime highly absorbent surfaces twice.
5. Painting of the primed surface is recommended no earlier than 2–3 hours later, provided the temperature is +5°C and the relative humidity is no more than 80%.
After finishing work, wash hands and tools thoroughly with warm water.

Store and transport in a tightly closed container at a temperature of not less than +5°C and not more than +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted. Protect the product container from excessive heat and avoid storage in direct sunlight. Provided the conditions are met, the guaranteed shelf life in the original sealed packaging is 24 months from the date of manufacture.

The product is fire and explosion-proof and does not contain flammable components.