Purpose:
The primer is intended for for dust removal, strengthening, and preparing the substrate for subsequent finishing (puttying, painting, wallpapering).

Base type:
Used for treating concrete, plastered, gypsum, and drywall surfaces, as well as particle board and fiberboard materials.
For interior and exterior use.

Application method:

• Brush
• Roller
• Spray gun

Consumption:
6–8 m²/l

Palette:
Colorless

Composition:
Polymer water dispersion, functional additives, water, biocide complex.

Color:
Colorless

Density:
1.0–1.05 kg/l

NV content:
Not less than 4%

Recommended number of layers:
1–2

Consumption*:
6–8 m²/l

Drying time**:
2 hours

Air temperature and substrate temperature during application:
from +5 °C to +35 °C

*Material consumption depends on the quality of surface preparation, the method of application, the tools used, the skill of the workers, and may differ from the indicated values.
** At t (+20±2)°C and relative air humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, the next layer should be applied no earlier than 24 hours later.

Used for treating concrete, plastered, gypsum, and drywall surfaces, as well as particle board and fiberboard materials.
For interior and exterior use.
The primer can be used in rooms with normal and high humidity.
Used in all types of buildings and structures (A, B, C).

Colorless

Surface preparation
Surface preparation should be carried out in accordance with SP 71.13330.2017.
The surface must be solid, clean and dry. Before priming, it is necessary to remove peeling elements, chalk and lime whitewash, dust and other contaminants from the surface.
If necessary, level surface irregularities with Bergauf putty, then sand the dried surface.

Work procedure
The surface to be treated must be dry and clean; the air and base temperature during application should be between +5°C and +35°C, with a relative air humidity below 80%.
Stir until homogeneous before use; do not dilute.
Apply to a prepared, dry, and clean surface using a roller, brush, or spray gun (nozzle 0,011−0.015″, pressure no more than 150−170 bar).
It is recommended to prime highly absorbent surfaces twice.
Painting of the primed surface is recommended no earlier than 2−3 hours later, provided the temperature is from +5°C and relative air humidity is no more than 80%.

Safety precautions
Work should be carried out using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Store and transport in a tightly closed container at a temperature from +5°C to +35°C. Five-fold freezing with a total duration of no more than 2 weeks at a temperature not lower than -40°C is allowed. The bucket with the product should be protected from excessive heat and stored away from direct sunlight. Subject to these conditions, the guaranteed shelf life in the original sealed packaging is 24 months from the date of manufacture. During storage, the product may separate, which is easily corrected by stirring. Keep the partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion-proof and does not contain flammable components.

Disposal
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.