Interior paints, decorative plasters and textured coatings for painting walls, ceilings, partitions and other surfaces indoors.
PAINT AND VARNISH MATERIALS FOR INTERIOR WORKS
A wide range of products to bring your ideas to life
Materials for rooms with normal and high humidity
Tinting in thousands of colors according to Ral, NCS and other color catalogs
Economical consumption
Vapor-permeable
Wash-resistant
Applies easily and evenly
Praktik paint. Living rooms and hallways
Packaging:
Washable paint for interior works
Download specifications
Purpose:
The paint is intended for painting walls and ceilings indoors with normal and high humidity (living rooms, bedrooms, kitchens, bathrooms, dining rooms, corridors) with high operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a durable, vapor-permeable coating that is resistant to light washing with non-abrasive detergents.
Scope of application:
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, plank wooden surfaces, chipboard, fiberboard, glass fiber and smooth painting fleece.
For interior works.
Application method:
Consumption:
8−11 m²/kg
Gloss level:
Matte
Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually or by computer (machine) to colors from RAL, NCS, and other color catalogs.
The paint is intended for painting walls and ceilings indoors with normal and high humidity (living rooms, bedrooms, kitchens, bathrooms, dining rooms, corridors) with high operational loads, including in children's, preschool, educational, and medical-preventive institutions. It forms a durable, vapor-permeable coating that is resistant to light washing with non-abrasive detergents.
Scope of application:
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, plank wooden surfaces, chipboard, fiberboard, glass fiber and smooth painting fleece.
For interior works.
Application method:
- Brush
- Roller
- Spray gun
Consumption:
8−11 m²/kg
Gloss level:
Matte
Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually or by computer (machine) to colors from RAL, NCS, and other color catalogs.
Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
Gloss level:
Matte
Consumption* per 1 coat on a smooth non-absorbent surface:
8−11 m²/kg
Wet scrub resistance GOST 32300/ DIN EN 13300:
Class 2
Density:
Base A approx. 1.56 kg/l
Base C approx. 1.4 kg/l
Non-volatile matter content:
Base A not less than 55%
Base C not less than 55%
Diluent:
Water
Drying time "to touch"**:
1 hour
The next coat can be applied after:
1.5 hours
Wash resistance:
Easy washing with non-abrasive detergents, no earlier than 2 weeks after application
Air temperature and substrate when using:
from +5 °C to +35 °C
* Material consumption depends on the quality of preparation and the absorbency of the substrate, the method of application, the tools used, the qualifications of the workers, and may differ from the indicated values.
** At a temperature of (+20±2)°C and a relative humidity of no more than (65±5)%. Drying time may increase if the temperature decreases or humidity increases. At an air temperature below +15°C or relative humidity above 65%, the next coat should be applied no earlier than 24 hours later.
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
- Base A — white.
- Base C — transparent
Gloss level:
Matte
Consumption* per 1 coat on a smooth non-absorbent surface:
8−11 m²/kg
Wet scrub resistance GOST 32300/ DIN EN 13300:
Class 2
Density:
Base A approx. 1.56 kg/l
Base C approx. 1.4 kg/l
Non-volatile matter content:
Base A not less than 55%
Base C not less than 55%
Diluent:
Water
Drying time "to touch"**:
1 hour
The next coat can be applied after:
1.5 hours
Wash resistance:
Easy washing with non-abrasive detergents, no earlier than 2 weeks after application
Air temperature and substrate when using:
from +5 °C to +35 °C
* Material consumption depends on the quality of preparation and the absorbency of the substrate, the method of application, the tools used, the qualifications of the workers, and may differ from the indicated values.
** At a temperature of (+20±2)°C and a relative humidity of no more than (65±5)%. Drying time may increase if the temperature decreases or humidity increases. At an air temperature below +15°C or relative humidity above 65%, the next coat should be applied no earlier than 24 hours later.
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, plank wooden surfaces, chipboard, fiberboard, glass fiber and smooth painting fleece.
For interior works.
For manual and mechanized application.
Used in all types of buildings and structures (A, B, C).
For interior works.
For manual and mechanized application.
Used in all types of buildings and structures (A, B, C).
The paint is produced in two bases: A (pastel colors) and C (saturated colors) and can be tinted using a computer (machine) method into RAL, NCS, and other color catalog shades. Manual tinting is possible using water-based tinting pastes. Base A can be used as a white paint; base C is used only in a tinted form.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions and the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog.
Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use a product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions and the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog.
Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use a product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
SURFACE PREPARATION
Surface preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust. Level out irregularities, depressions, cracks, and chips with Bergauf putty and sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Intensely absorbent surfaces should be pre-primed with Praktik strengthening primer before painting to increase coating reliability and reduce paint consumption.
WORK PROCEDURE
Thoroughly stir the paint. The paint is ready for use; if necessary, it can be diluted with water by no more than 5%. Apply the paint to a prepared, dry, clean surface with a roller, brush, or spray gun in two coats. For rough surfaces (textured plasters, brick, concrete blocks, relief ceilings), it is recommended to use rollers with a pile length of 12–25 mm. For rough surfaces (putty, plaster, concrete) — with a pile length of 8–12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5-10% is allowed, nozzle 0.013-0.015″, pressure 180-190 bar. When performing work, avoid exposure to direct sunlight, high humidity conditions, and precipitation. The temperature of the air and the substrate during application should be from +5°C to +35°C, relative air humidity below 80%.
After finishing work, wash hands and tools thoroughly with warm water.
SAFETY PRECAUTIONS
Work should be carried out using personal protective equipment for hands, eyes, and respiratory organs. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
Surface preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust. Level out irregularities, depressions, cracks, and chips with Bergauf putty and sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Intensely absorbent surfaces should be pre-primed with Praktik strengthening primer before painting to increase coating reliability and reduce paint consumption.
WORK PROCEDURE
Thoroughly stir the paint. The paint is ready for use; if necessary, it can be diluted with water by no more than 5%. Apply the paint to a prepared, dry, clean surface with a roller, brush, or spray gun in two coats. For rough surfaces (textured plasters, brick, concrete blocks, relief ceilings), it is recommended to use rollers with a pile length of 12–25 mm. For rough surfaces (putty, plaster, concrete) — with a pile length of 8–12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5-10% is allowed, nozzle 0.013-0.015″, pressure 180-190 bar. When performing work, avoid exposure to direct sunlight, high humidity conditions, and precipitation. The temperature of the air and the substrate during application should be from +5°C to +35°C, relative air humidity below 80%.
After finishing work, wash hands and tools thoroughly with warm water.
SAFETY PRECAUTIONS
Work should be carried out using personal protective equipment for hands, eyes, and respiratory organs. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.
STORAGE AND TRANSPORTATION
Store and transport in a tightly closed container at temperatures from +5°C to +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted. Protect the product bucket from excessive heat and avoid storage in direct sunlight. Subject to compliance with storage conditions, the shelf life in the original sealed packaging is 24 months from the date of manufacture. Separation of the product may occur during storage, which is easily corrected by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire- and explosion-proof and does not contain flammable components.
DISPOSAL
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.
Store and transport in a tightly closed container at temperatures from +5°C to +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted. Protect the product bucket from excessive heat and avoid storage in direct sunlight. Subject to compliance with storage conditions, the shelf life in the original sealed packaging is 24 months from the date of manufacture. Separation of the product may occur during storage, which is easily corrected by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire- and explosion-proof and does not contain flammable components.
DISPOSAL
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.