The product is manufactured until July 2026.

Purpose:
Paint for decorative finishing and adding texture to surfaces, for interior finishing work, including in rooms with high humidity (kitchens, bathrooms, hallways, entrances). It possesses high decorative properties, excellent hiding power, and strong adhesion to the painted surface. It has no harsh odor.


Base type:

• Plastered, gypsum, and drywall surfaces, as well as surfaces previously painted with water-dispersion paints.

Application method:

• Brush
• Roller
• Spray gun

Consumption:
1–1.5 m²/kg

Gloss level:
Matte

Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.

Composition:
Polyacrylic dispersion, pigments, fillers, functional additives, water

Color:
White

Gloss level:
Matte

Wet scrub resistance GOST 32300/ DIN EN 13 300:
Class 2

Density:
Approx. 1.67 kg/l

Non-volatile matter content:
Not less than 75%

Thinner:
Water

Consumption:
From 1–1.5 m²/kg*

Drying time:
1–4 hours (depending on surface texture and layer thickness); full drying – 24 hours**

Texture adjustment time:
1 hour.

Base temperature during application:
From +5 °C to +35 °C

*Material consumption depends on the quality of surface preparation, application method, tools used, the skill of the workers, and may differ from the indicated values.
**At t (+20±2) °C and relative humidity of no more than (65±5) %. If the temperature decreases or humidity increases, the drying time may increase.

Area of application

The paint can be applied to plastered, gypsum, and drywall surfaces, as well as surfaces previously painted with water-dispersion paints.

Suitable for use in buildings and structures:

• type A — residential buildings and dormitories; buildings and premises of organizations for education and training, recreation and health improvement of children and youth; healthcare organizations; homes for the disabled and elderly; sanatoriums; holiday homes; indoor sports facilities; office premises with permanent human presence in administrative buildings at industrial enterprises and other objects of types B, C;
• type B — food industry enterprises, trade and catering; hotels; industrial goods stores; communications enterprises; consumer service enterprises; cultural and entertainment facilities and other objects; administrative buildings;
• Type C — industrial enterprises, auxiliary and utility rooms and structures; warehouses; garages.

Paint tinting can be carried out in accordance with NCS, RAL, and other tinting systems; it is permissible to add up to 5% of tinting pastes by weight of the paint.

To avoid differences in shade on a single surface, use a product with the same batch number (see on the packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the result.

Depending on the application conditions and the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color compliance.

After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.

Surface Preparation

Surface preparation should be carried out in accordance with SP 71.13330.2017. Clean the surface of dust and dirt. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Sand hard and firmly adhering glossy surfaces to a matte state, and remove sanding dust. Remove loose layers of old paint and whitewash from previously painted surfaces. Level out irregularities, depressions, cracks, and chips with water-dispersion putty and sand them down.
Prime highly absorbent surfaces beforehand to increase coating reliability and reduce paint consumption. It is recommended to use primers and putties from the Bergauf line (depending on the type of surface).

Work Procedure

The surface to be painted must be dry and clean; the surface and air temperature must be at least +5 °C, and the relative air humidity below 80%. The room temperature during paint application should be from +5 °C to 35 °C, with a relative air humidity of (65±5)%.
Stir the paint thoroughly before use. The paint is ready for use. To avoid differences in shade, use paint from the same batch. Before starting work, perform a test painting of the surface to check for color compliance.

Application Technology

The material is applied with a roller, brush, spatula, sponge, or special tool for decorative materials. The maximum layer thickness is 2–3 mm. After evenly distributing the material over the surface, start creating the relief with the same roller by moving it from top to bottom. The intensity of the relief depends on the number of passes when forming the pattern.
To achieve the desired relief, use structural rollers or a notched trowel.
After finishing work, wash hands and tools thoroughly with warm water.

Storage and Transportation Conditions

Store and transport in tightly closed containers at a temperature of at least +5°C and no more than +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures down to –40°C is permitted.
Protect the bucket with the product from excessive heat and avoid storage in direct sunlight. When conditions are met, the warranty shelf life in the original sealed packaging is 24 months from the date of manufacture.
During storage, the product may separate, which is easily corrected by stirring. Keep partially used product in a tightly closed container and use as soon as possible.

Safety

The product is fire and explosion-proof and does not contain flammable components.