Purpose:
The paint is designed to add relief to surfaces and for decorative finishing of walls and ceilings indoors (offices, halls, lobbies), including areas with high humidity (kitchens, bathrooms, corridors, entrances). It allows for the creation of various textured patterns. After drying, it forms a durable structural coating that is resistant to light washing with non-abrasive detergents. It possesses high decorative properties, excellent hiding power, and strong adhesion to the painted surface.
Hides surface irregularities.
Easy to apply.
Wear-resistant.
Vapor-permeable.
Can be tinted into pastel and saturated colors.

Type of substrate:
The paint can be applied to concrete, plastered, gypsum, and drywall surfaces, as well as to surfaces previously painted with water-dispersion paints. For interior use.

Method of application:

• Brush
• Roller
• Spray gun

Consumption:
1–2 m²/kg

Gloss level:
Matte

Tinting:
Textured paint is produced as a base and can be tinted using a computer (machine) system into colors from NCS, RAL, and other color catalogs. Manual tinting is possible using water-based tinting pastes.

Composition:
Polymer dispersion, pigments, fillers, functional additives, water.

Color:
White

Gloss level:
Matte

Wet scrub resistance GOST 32 300/ DIN EN 13 300:
Class 2

Wash resistance:
Easy washing with non-abrasive detergents, no earlier than 2 weeks after application

Density:
1.6−1.67 kg/l

Consumption:
From 1−2 m²/kg*

Drying time “tack-free”**:
1−4 hours (depending on surface texture and layer thickness); full drying — 24 hours**

Texture adjustment time:
Up to 1 hour depending on layer thickness.

Air temperature and substrate temperature during application:
From +5 °C to +35 °C

*Material consumption depends on the quality of preparation and the absorbency of the substrate, the method of application, the tools used, the qualifications of the workers, and may differ from the indicated values.
**At a temperature of (+20±2)°C and a relative air humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or a relative air humidity above 65%, the next layer should be applied no earlier than 24 hours later.

Scope of application

The paint can be applied to concrete, plastered, gypsum, and drywall surfaces, as well as to surfaces previously painted with water-dispersion paints.
For interior works.
For manual and mechanized application.
Used in all types of buildings and structures (A, B, C).

Textured paint is produced as a base and can be tinted using a computer (machine) system into colors from NCS, RAL, and other color catalogs. Manual tinting is possible using water-based tinting pastes.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions and the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog.
Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use a product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.

Surface preparation

Surface preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust. Level out irregularities, depressions, cracks, and chips with Bergauf putty and sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Intensely absorbent surfaces should be pre-primed with Praktik strengthening primer before painting to increase the reliability of the coating and reduce paint consumption.

Operating procedure

The surface to be painted must be dry and clean. The air and surface temperature during application should be between +5°C and +35°C, relative air humidity below 80%.
Stir the paint thoroughly before use; the paint is ready to use.
To avoid shade differences, use paint from the same batch. Before starting work, perform a test application on the surface to check for color consistency.
The maximum thickness of a single layer is 2–3 mm; it is possible to apply several layers depending on the desired decorative effect.
The material is applied with a roller, brush, sponge, stamp, spatula, or Venetian trowel, followed by texturing. It should be noted that the surface being painted must be covered from corner to corner across the entire area due to the difficulty of joining multiple layers after they have dried.
To obtain a "fur coat" texture, the material is evenly distributed over the surface with a stainless steel trowel, followed by structuring with a roller, or it is distributed immediately with a roller, and the same roller is used to start creating the relief by moving it from top to bottom. The intensity of the relief depends on the number of passes when forming the pattern. Use structural or paint rollers to achieve the desired relief.
After finishing work, wash hands and tools thoroughly with warm water.

Safety precautions
Work should be carried out using personal protective equipment for hands, eyes, and respiratory organs. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Storage and transportation conditions

Store and transport in a tightly closed container at a temperature of at least +5°C and no more than +35°C. Five-fold freezing is permitted for a total duration of no more than 2 weeks at a temperature not lower than -40°C.
The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the guaranteed shelf life in the original sealed packaging is 24 months from the date of manufacture.
During storage, the product may separate, which is easily corrected by stirring. Keep any remaining product in a tightly closed container and use it as soon as possible.

Disposal
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.