Interior paints, decorative plasters and textured coatings for painting walls, ceilings, partitions and other surfaces indoors.
PAINT AND VARNISH MATERIALS FOR INTERIOR WORKS
A wide range of products to bring your ideas to life
Materials for rooms with normal and high humidity
Tinting in thousands of colors according to Ral, NCS and other color catalogs
Computer tinting
Eco-friendly, hypoallergenic
Applies easily and evenly
Snow-white matte
Odorless, water-based
PRAKTIK interior paint
Packaging:
Water-dispersion polyacrylic paint for indoor use
Download specifications
The product is manufactured until July 2026.
Purpose:
Paint for painting walls and ceilings indoors with normal humidity. The paint is ready for use.
Base type:
4−7 m²/kg
Gloss level:
Matte
Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
Purpose:
Paint for painting walls and ceilings indoors with normal humidity. The paint is ready for use.
Base type:
- Concrete, brick, fiberboard and chipboard, plasterboard, plastered, previously painted surfaces (non-glossy), glass fiber and smooth painting fleece.
- Brush
- Roller
- Spray gun
4−7 m²/kg
Gloss level:
Matte
Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
Composition:
Polyacrylic dispersion (latex), pigments, fillers, functional additives, water.
Color:
Base A — white
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
5–7 m²/kg
Consumption per 1 coat on an uneven absorbent surface:
4–6 m²/kg
Density:
approx. 1.5 kg/l
Non-volatile matter content:
55%
Drying time to degree 3**:
0.5 hours
Next coat can be applied after**:
1 hour**
Wash resistance:
Cleaning with a dry non-abrasive sponge or a soft-bristled brush
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of substrate preparation, application method, tools used, the skill of the workers, and may differ from the indicated values.
** at t +20±2 °C and relative air humidity of no more than 65±5%.
If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, do not apply the next coat earlier than 24 hours later.
Polyacrylic dispersion (latex), pigments, fillers, functional additives, water.
Color:
Base A — white
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
5–7 m²/kg
Consumption per 1 coat on an uneven absorbent surface:
4–6 m²/kg
Density:
approx. 1.5 kg/l
Non-volatile matter content:
55%
Drying time to degree 3**:
0.5 hours
Next coat can be applied after**:
1 hour**
Wash resistance:
Cleaning with a dry non-abrasive sponge or a soft-bristled brush
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of substrate preparation, application method, tools used, the skill of the workers, and may differ from the indicated values.
** at t +20±2 °C and relative air humidity of no more than 65±5%.
If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, do not apply the next coat earlier than 24 hours later.
Purpose and properties
Intended for painting walls and ceilings indoors with normal humidity. The paint is ready for use. It is easy to apply, dries quickly, and has no harsh odor. After drying, it forms an even matte surface.
Possesses good decorative properties, hiding power, and strong adhesion to the painted surface. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Manual tinting is possible using water-based tinting pastes.
Area of application
The paint can be applied to concrete, brick, fiberboard and particleboard, plasterboard, plastered, previously painted surfaces (non-glossy), glass fiber, and smooth painting fleece. For manual and mechanized application.
Suitable for use in buildings and structures:
Intended for painting walls and ceilings indoors with normal humidity. The paint is ready for use. It is easy to apply, dries quickly, and has no harsh odor. After drying, it forms an even matte surface.
Possesses good decorative properties, hiding power, and strong adhesion to the painted surface. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Manual tinting is possible using water-based tinting pastes.
Area of application
The paint can be applied to concrete, brick, fiberboard and particleboard, plasterboard, plastered, previously painted surfaces (non-glossy), glass fiber, and smooth painting fleece. For manual and mechanized application.
Suitable for use in buildings and structures:
- type A — residential buildings and dormitories; buildings and premises of organizations for education and training, recreation and health improvement of children and youth; healthcare organizations; homes for the disabled and elderly; sanatoriums; holiday homes; indoor sports facilities; office premises with permanent human presence in administrative buildings at industrial enterprises and other objects of types B, C;
- type B — food industry enterprises, trade and catering; hotels; industrial goods stores; communications enterprises; consumer service enterprises; cultural and entertainment facilities and other objects; administrative buildings;
- Type C — industrial enterprises, auxiliary and utility rooms and structures; warehouses; garages.
The paint is produced as base A and can be tinted using a computer (machine) method. Base A is intended for tinting into light and pastel shades, and can also be used as white paint.
The paint can be tinted in accordance with NCS, RAL, and other tinting systems; it is permissible to add up to 5% of tinting pastes by the weight of the paint.
Manual tinting is possible using water-based tinting pastes. To avoid differences in shade on a single surface, use a product with the same batch number (see on the packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the result.
Depending on the application conditions and the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
The paint can be tinted in accordance with NCS, RAL, and other tinting systems; it is permissible to add up to 5% of tinting pastes by the weight of the paint.
Manual tinting is possible using water-based tinting pastes. To avoid differences in shade on a single surface, use a product with the same batch number (see on the packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the result.
Depending on the application conditions and the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
Surface preparation
Prepare the surface in accordance with SP 71.13330.2017. Clean the surface of dust and dirt. Remove loose layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust.
Level out irregularities, depressions, cracks, and chips with Bergauf UNI PASTA water-dispersion putty and sand them down. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Prime highly absorbent surfaces beforehand to increase the reliability of the coating and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of surface).
Prepare the surface in accordance with SP 71.13330.2017. Clean the surface of dust and dirt. Remove loose layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust.
Level out irregularities, depressions, cracks, and chips with Bergauf UNI PASTA water-dispersion putty and sand them down. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Prime highly absorbent surfaces beforehand to increase the reliability of the coating and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of surface).
Storage and transportation conditions
Store and transport in a tightly closed container at a temperature of at least +5°C and no more than +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted.
The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the warranty storage period in the original sealed packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
Safety
The product is fire and explosion-proof and does not contain flammable components.
Store and transport in a tightly closed container at a temperature of at least +5°C and no more than +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted.
The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the warranty storage period in the original sealed packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
Safety
The product is fire and explosion-proof and does not contain flammable components.