Purpose:
The paint is intended for painting walls and ceilings in rooms with normal and changing humidity (kitchens, dining rooms, corridors) with moderate operational load, including in children's, preschool, educational, and medical-preventive institutions. Forms a moisture-resistant coating, resistant to water vapor and condensation, easy wet cleaning without the use of detergents and abrasive agents. Ready to use.

Base type:
The paint can be applied to new and previously painted with water-dispersion paints drywall; plastered, puttied, concrete, brick, wooden plank surfaces, chipboard, fiberboard, glass fiber and smooth painting fleece.
For interior works.

Application method:

• Brush
• Roller
• Spray gun

Consumption:
8−11 m²/kg

Gloss level:
Matte

Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.

Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.

Color:
Base A — white
Base C — transparent

Gloss level:
Matte

Consumption per 1 layer on a smooth non-absorbent surface:
8−11 m²/kg

Density:
Base A 1.55−1.6 kg/l
Base C 1.26−1.3 kg/l

Drying time "to touch"**:
1 hour

The next layer can be applied after**:
1.5 hours**

Wet scrub resistance GOST 32 300/ DIN EN 13 300:
Class 4

Wash resistance:
Light wet cleaning without the use of detergents

Air temperature and substrate temperature during application:
+5 °C to 35 °C

* Material consumption depends on the quality of preparation and the absorbency of the substrate, the method of application, the tools used, the skill of the workers, and may differ from the indicated values.
** At a temperature of (+20±2)°C and a relative humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, the next layer should be applied no earlier than 24 hours later.

Purpose and properties
The paint is intended for painting walls and ceilings in rooms with normal and variable humidity (kitchens, dining rooms, corridors) with moderate operational load, including in children's, preschool, educational, and medical-preventive institutions. It forms a moisture-resistant coating that is resistant to water vapor and condensation, and suitable for light damp cleaning without the use of detergents or abrasive agents. It is easy to apply and roll out without splashing or dripping.
Vapor-permeable.
Economical consumption.
Can be tinted into pastel and saturated colors.

Scope of application
The paint can be applied to new and previously painted water-dispersion paint surfaces such as drywall; plastered, puttied, concrete, brick, plank wooden surfaces, chipboard, fiberboard, glass fiber, and smooth painting fleece.
For interior works.
Dor manual and mechanized application.
Used in all types of buildings and structures (A, B, C).

The paint is produced in two bases: A (pastel colors) and C (saturated colors) and can be tinted using a computer (machine) method into RAL, NCS, and other color catalog shades. Manual tinting is possible using water-based tinting pastes. Base A can be used as a white paint; base C is used only in a tinted form.
The organization performing the tinting is responsible for the tinting result.

Depending on the application conditions and the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog.
Before use, perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.

To avoid differences in shade, it is recommended to use a product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.

SURFACE PREPARATION
Surface preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust. Level out irregularities, depressions, cracks, and chips with filler Bergauf, and sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Intensely absorbent surfaces should be pre-primed with Praktik strengthening primer before painting to increase the reliability of the coating and reduce paint consumption.

PROCEDURE
Stir the paint thoroughly. The paint is ready for use; if necessary, it can be diluted with water by no more than 5%. Apply the paint to a prepared, dry, clean surface with a roller, brush, or spray gun in two coats. For rough surfaces (textured plasters, brick, concrete blocks, relief ceilings), it is recommended to use rollers with a pile length of 12-25 mm. For rough surfaces (putty, plaster, concrete) — with a pile length of 8-12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5–10% is allowed, nozzle 0.013–0.015″, pressure 180–190 bar. During work, avoid exposure to direct sunlight, high humidity conditions, and precipitation. The air and surface temperature during application should be from +5°C to +35°C, with relative air humidity below 80%.
After finishing work, wash hands and tools thoroughly with warm water.

SAFETY PRECAUTIONS
Work should be carried out using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Store and transport in a tightly closed container at temperatures from +5°C to +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted. Protect the product bucket from excessive heat and avoid storage in direct sunlight. Subject to compliance with storage conditions, the shelf life in the original sealed packaging is 24 months from the date of manufacture. Separation of the product may occur during storage, which is easily corrected by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire- and explosion-proof and does not contain flammable components.

DISPOSAL
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.