Purpose:
The paint is intended for painting ceilings and upper wall panels inside dry rooms. The matte structure of the paint masks minor surface imperfections of the ceiling. It provides high-quality, uniform coverage without leaving splashes or drips. It is easy to apply, dries quickly, and has no harsh odor. Manual tinting is possible using water-based tinting pastes.
Creates a snow-white "breathable" coating.
Visually expands the space.
Reliably covers in 2 coats.

Color:
Super white

Base type:
The paint can be applied to new and previously painted water-dispersion paints on drywall; plastered, puttied, concrete, brick, chipboard, fiberboard, glass fiber, and smooth painting fleece.
For interior works.

Application method:

• brush
• roller
• spray gun

Consumption:
8−11 m²/kg

Gloss level:
Deep-matte

Tinting:
Manual tinting is possible using water-based tinting pastes.

Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.

Color:
Super white

Gloss level:
Deep-matte

Consumption* per 1 coat on a smooth, non-absorbent surface:
8−11 m^2/l

Density:
1.5−1.55 kg/l

Drying time "touch-dry"**:
0.5 hours

Time for applying the next coat**:
1 hour**

Surface temperature during application:
+5 °C to 35 °C


* Material consumption depends on the quality of preparation and the absorbency of the substrate, the method of application, the tools used, the qualifications of the workers, and may differ from the indicated values.
** At t (+20±2)°C and a relative air humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or a relative air humidity above 65%, the next layer should be applied no earlier than 24 hours later.

Purpose and scope of application
The paint can be applied to new and previously painted water-dispersion paints on drywall; plastered, puttied, concrete, brick, chipboard, fiberboard, glass fiber, and smooth painting fleece.
For interior works.
For manual and mechanized application.

Used in all types of buildings and structures (A, B, C).

Manual tinting is possible using water-based tinting pastes.

Surface preparation
Surface preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Sand hard and firmly adhering glossy surfaces to a matte finish, and remove sanding dust. Level out irregularities, depressions, cracks, and chips with Bergauf putty and sand down.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Intensely absorbent surfaces should be pre-primed with Praktik strengthening primer before painting to increase coating reliability and reduce paint consumption.

Work procedure
Stir the paint thoroughly. The paint is ready for use; if necessary, it can be diluted with water by no more than 5%. Apply the paint to a prepared, dry, and clean surface in two coats using a roller, brush, or spray gun. For rough surfaces (textured plasters, brick, concrete blocks, embossed ceilings), it is recommended to use rollers with a pile length of 12–25 mm. For rough surfaces (putty, plaster, concrete) — with a pile length of 8–12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (architraves, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water by 5–10% is allowed, nozzle 0.013–0.015″, pressure 180–190 bar. When performing work, avoid exposure to direct sunlight, high humidity conditions, and precipitation. The air and surface temperature during application should be from +5°C to +35°C, with relative air humidity below 80%.
After finishing work, wash hands and tools thoroughly with warm water.

Safety precautions
Work should be carried out using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Storage and transportation conditions
Store and transport in a tightly closed container at a temperature from +5°C to +35°C. Five-fold freezing with a total duration of no more than 2 weeks at a temperature not lower than -40°C is allowed. The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the warranty shelf life in the original sealed packaging is 24 months from the date of manufacture. During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion-proof and does not contain flammable components.

Disposal
Do not pour paint products into sewage systems, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local regulations; hand over liquid residues to hazardous waste collection points.