Purpose:
Paint for tiles, PVC and concrete.

Base type:

• Ceramic tiles
• Porcelain stoneware
• PVC
• Laminate, linoleum
• Previously painted or varnished wood
• Natural stone
• Concrete and any mineral substrates

Application method:

• Brush
• Roller
• Spray gun

Consumption:
8-12 m²/l

Gloss level:
Semi-matte (10-20%)

Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually or by computer (machine) to colors from RAL, NCS, and other color catalogs.

Composition:
Modified styrene-acrylic copolymer dispersion, titanium dioxide, fillers, biocides, functional additives, water.

Color:
Base A — white; Base C — transparent

Gloss level:
Semi-matte (10-20%)

Consumption per 1 layer:
8-12 m²/l*

Drying time:
1 hour**

Inter-layer drying time:
2-3 hours**

Wash resistance:
Wet cleaning with non-abrasive detergents.

Wet scrub resistance GOST 32300/ DIN EN 13300:
Class 1

Substrate temperature during application:
+5 °C to 35 °C

Shelf life:
24 months

* Material consumption depends on the quality of surface preparation, application method, tools used, the skill of the workers, and may differ from the indicated values.
** At t (+20±2)°C and relative humidity of no more than (65±5)%. If the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative humidity above 65%, apply the next coat no earlier than 24 hours later.

Semi-matte water-based universal paint for interior work, specially designed for painting complex smooth surfaces. Provides a durable and elastic coating resistant to moisture and
mechanical damage. It has high adhesion and antibacterial protection.
Ideally suited for updating interiors, including damp rooms (bathrooms, kitchens).

Scope of application
Used for painting ceramic tiles, porcelain stoneware, PVC, laminate, linoleum, previously painted or varnished wood, natural stone, concrete, and any mineral substrates.

The paint is produced in two bases, A and C, and can be tinted by computer (machine) method into colors of RAL, NCS, and other color catalogs. Base A is intended for tinting into light and pastel shades, it can also be used as a white paint, it is permissible to add up to 5% of tinting pastes by weight of the paint.
Base C is used only in tinted form and is intended for tinting into saturated shades, it is permissible to add up to 10% of tinting pastes by weight of the paint. When painting in bright colors on base C, it is recommended to first apply a layer of base A paint tinted in a similar shade. Manual tinting is possible using water-based tinting pastes.
The organization performing the tinting bears responsibility for the result. Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog.
Before use, perform a test application and check the dried coating for color matching.
To avoid differences in shade, it is recommended to use product from the same production batch on a single visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio, the application technology
must remain unchanged.

Surface preparation:

• Clean the substrate of dust and dirt. From previously painted surfaces, remove loose layers of old paint and whitewash. Level out irregularities, depressions, cracks, and chips with water-dispersion putty, then sand.
• Pre-wash the surface to be painted with water using detergents, rinse the joints on ceramic tiles especially thoroughly, then dry the surface. If there is mold on the surface, treat it with an antiseptic agent. It is recommended to pre-sand and degrease smooth, high-gloss, shiny surfaces to improve adhesion.
• Intensively absorbent mineral surfaces should be pre-primed with Bergauf Techno Primer deep-penetrating primer to increase the reliability of the coating and reduce paint consumption.

Work procedure:
The surface to be painted must be dry and clean; the air and substrate temperature for work should be between +5°C and +35°C, with a relative air humidity below 80%.
Stir the paint thoroughly before use.
It is necessary to stir with a wide, flat stick or a construction mixer at low speeds, carefully, avoiding the formation of air bubbles, for 1–3 minutes. It is not recommended to stir
the material by shaking the closed can. After transportation and/or active stirring, if air bubbles appear, the paint needs to settle until they disappear. Apply to a prepared, dry, clean surface with a brush, roller, or spray gun,
thoroughly painting over irregularities and corners in 1–2 coats.
For smooth surfaces, it is recommended to use rollers with a pile length of up to 6 mm. If necessary, dilute with clean water, no more than 5% of the paint volume.
To avoid differences in the shade of the finish coat, it is recommended to use paint from the same batch or mix the required amount in one container.
After finishing work, wash hands and tools thoroughly with warm water.

Safety precautions
Do not mix with other paints or solvents.
Work should be carried out using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water. Keep out of reach of children!

Store and transport in a tightly closed container at a temperature from +5°C to +35°C. Freezing up to five times for a total duration of no more than 2 weeks at temperatures not lower than -40°C is permitted. The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the warranty shelf life in the original sealed packaging is 24 months from the date of manufacture.
During storage, the product may separate, which is easily corrected by stirring. Keep any partially used product in a tightly closed container and use as soon as possible.
The product is fire- and explosion-proof and does not contain flammable components.