Bergauf silicone, silicate, and complex adhesive paints for facades, plinths, and any other exterior surfaces.
Paints and coatings for exterior works
Paints tested for system compatibility
Provide an excellent combination of durability and aesthetics
Reliably protect against moisture, sun, and sudden temperature changes
For interior and exterior works
Wear resistance
Deep matte snow-white
High hiding power
MINERAL TECHNO water-dispersion acrylic paint for facade works
Packaging:
Facade water-dispersion acrylic paint
Download specifications
Purpose:
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
Method of application:
Consumption:
4−8 m²/l
Gloss level:
Deep-matte
Tinting:
The paint is produced in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) to colors from RAL, NCS, and other color catalogs.
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
- Concrete, reinforced concrete
- Cement plasters
- Cement-lime and lime plasters
- Mineral and acrylic decorative plasters
- Non-glossy building ceramics
- Firmly adhering coatings previously painted with water-dispersion or perchlorovinyl paints
Method of application:
- Brush
- Roller
- Spray gun
Consumption:
4−8 m²/l
Gloss level:
Deep-matte
Tinting:
The paint is produced in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) to colors from RAL, NCS, and other color catalogs.
Composition:
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep-matte
Consumption per 1 coat on a non-absorbent surface:
6 - 8 m²/l*
Consumption per 1 coat on an absorbent surface:
4 - 6 m²/l*
Drying time:
1 hour**
The next coat can be applied after:
12 hours**
Surface temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is influenced by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)°C and relative air humidity of no more than (65±5)%. Drying time may increase at air temperatures below +15 °C and relative air humidity above 65% - apply the next coat no earlier than 24 hours later.
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep-matte
Consumption per 1 coat on a non-absorbent surface:
6 - 8 m²/l*
Consumption per 1 coat on an absorbent surface:
4 - 6 m²/l*
Drying time:
1 hour**
The next coat can be applied after:
12 hours**
Surface temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is influenced by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)°C and relative air humidity of no more than (65±5)%. Drying time may increase at air temperatures below +15 °C and relative air humidity above 65% - apply the next coat no earlier than 24 hours later.
Acrylic facade paint is intended for painting mineral facades and plinths, as well as for rooms with normal and high humidity. Capillary moisture suction from the base side must be excluded on building plinths.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
The paint is produced in 2 bases — A and C. Tinting with water-based tinting pastes is possible. Base A is intended for tinting into light and pastel shades and can also be used as white paint. Base C is used only in tinted form and is intended for tinting into saturated shades.
When painting in bright colors using base C, it is recommended to first apply a layer of base A paint tinted in a similar shade. The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
To avoid differences in shade on a single surface, use a product with the same batch number (see on the packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color compliance.
When painting in bright colors using base C, it is recommended to first apply a layer of base A paint tinted in a similar shade. The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
To avoid differences in shade on a single surface, use a product with the same batch number (see on the packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color compliance.
Surface preparation
- Clean the surface of dust, dirt, efflorescence, and oil stains. Remove loose paint and plaster using a sandblasting or hydro-sandblasting machine or a steel brush. Heavily chalking and weak surfaces must be cleaned down to a solid base mechanically or by washing with pressurized water.
- Level surface defects with an appropriate repair mortar. In case of fungal or mold growth on the surface, treat it with a sanitizing agent, following the relevant instructions.
- New concrete surfaces can be painted after one heating season, new plastered surfaces after 1–2 months, and new fiber-cement boards after 6 months. Treat glossy concrete surfaces (cement laitance) with a sandblasting machine or a steel brush to create a profile suitable for painting.
- Open any cracks in the reinforced concrete structure by scraping or using a grinding machine with a disc and flange. Clean the exposed metal of rust and protect it with an anti-corrosion paint.
- Before application, treat the surface with an appropriate primer from the Bergauf line — Bergauf Tiefgrunt, Bergauf Techno Primer, or Bergauf Aqua Grunt (in diluted form, choose the concentration level depending on the type of substrate).
- The surface must be dry, clean, and primed before painting. Apply the paint at a temperature not lower than +5°C and a relative air humidity of no more than 80%. It is forbidden to carry out work in hot weather, in strong wind, under direct sunlight, or during rain.
- Stir the paint thoroughly before use. Dilution of the paint with water is permitted in an amount of no more than 5% by weight of the material. Apply to the prepared surface with a brush, roller, or spray gun evenly in 2 coats.
- To avoid differences in shade, use paint from the same batch. It is recommended not to take breaks when painting a continuous surface; in areas of "overlaps," work using the "wet-on-wet" method. Work should be finished at architectural boundaries (at the corners of the building, under downpipes, etc.).
Storage and transportation conditions
Store and transport in a tightly closed container at a temperature of no less than +5°C and no more than +40°C. The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the guaranteed shelf life in the original sealed packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-proof and does not contain flammable components.
Store and transport in a tightly closed container at a temperature of no less than +5°C and no more than +40°C. The bucket with the product should be protected from excessive heat and stored away from direct sunlight. If conditions are met, the guaranteed shelf life in the original sealed packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-proof and does not contain flammable components.