Materials for protecting buildings and materials made of wood from fire, mold, rot, fungi, and wood-boring insects.
Wood protection
Visual inspection of application
Extend the service life of wooden surfaces
Suitable for indoor
and outdoor work
and outdoor work
Antiseptic properties against mold and fungi
For indoor and outdoor use
Protection against fire and spread of flames
Visual inspection of application
Wood protection WOOD EXPERT
Packaging:
A means of protecting against fire, rot, mold and fungal growth, wood-boring insects
Download specifications
Purpose:
Fire and bio-protection — a means of protection against fire, rot, blue stain mold and fungi, wood-boring insects under conditions of hygroscopic and condensation dampening without contact with the ground, exposure to atmospheric precipitation, and soil moisture.
I (highest) group of fire-protection efficiency according to GOST 53 292–2009.
Substrate type:
*Mechanical application is possible on an already treated surface with the same composition. Depends on the type of wood and the quality of its surface.
Total consumption to ensure fire-retardant properties for Group I (hard-to-ignite wood):
At least 500 g/sq.m*
Consumption to ensure fire-retardant properties for Group II (hard-to-burn wood) and bioprotection:
At least 250 g/cubic.m*
Palette:
Red
Fire and bio-protection — a means of protection against fire, rot, blue stain mold and fungi, wood-boring insects under conditions of hygroscopic and condensation dampening without contact with the ground, exposure to atmospheric precipitation, and soil moisture.
I (highest) group of fire-protection efficiency according to GOST 53 292–2009.
Substrate type:
- New and previously antiseptic-treated wooden rafters, beams, battens, trusses, floors, cladding, partitions, walls, and other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.
- Combustion
- Ignition
- Spread of flames
- Rotting
- Mould
- Blue stain
- Wood-boring insects
- Universal, provides two groups of fire protection with one material
- Turns wood into a hard-to-burn, hard-to-ignite material
- Slightly stains the wood to speed up quality control of the work
- Preserves the texture and does not prevent wood from breathing
- Does not impair the strength characteristics of the treated wood
- Stops bio-infestation that has already begun
- Manual (brush, roller)
- Mechanical (sprayer)*
- Immersion
- Soaking
- Autoclaving
*Mechanical application is possible on an already treated surface with the same composition. Depends on the type of wood and the quality of its surface.
Total consumption to ensure fire-retardant properties for Group I (hard-to-ignite wood):
At least 500 g/sq.m*
Consumption to ensure fire-retardant properties for Group II (hard-to-burn wood) and bioprotection:
At least 250 g/cubic.m*
Palette:
Red
Composition:
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire-retardant properties for Group I (hard-to-ignite wood):
At least 500 g/m²*
Coverage required to ensure fire-retardant properties for Group II (hard-to-ignite wood) and bio-protection:
At least 250 g/m²*
Drying time between coats:
20-40 minutes
Complete drying:
After 24 hours
Bio-protection service life:
20 years (under a roof)
Fire and bio-protection service life:
10 years
Meets GOST:
Group I (highest) fire-retardant efficiency according to GOST 53292-2009
*Coverage depends on operating conditions and the required service life of the treated wood. All the quality indicators and recommendations provided are valid for an ambient temperature of +20°C and a relative air humidity of 60%. Under other conditions, the material’s technical characteristics may differ from those stated.
Organic and inorganic flame retardants, biocidal components, water
Color:
Red
Total consumption to ensure fire-retardant properties for Group I (hard-to-ignite wood):
At least 500 g/m²*
Coverage required to ensure fire-retardant properties for Group II (hard-to-ignite wood) and bio-protection:
At least 250 g/m²*
Drying time between coats:
20-40 minutes
Complete drying:
After 24 hours
Bio-protection service life:
20 years (under a roof)
Fire and bio-protection service life:
10 years
Meets GOST:
Group I (highest) fire-retardant efficiency according to GOST 53292-2009
*Coverage depends on operating conditions and the required service life of the treated wood. All the quality indicators and recommendations provided are valid for an ambient temperature of +20°C and a relative air humidity of 60%. Under other conditions, the material’s technical characteristics may differ from those stated.
Purpose and scope of application
Fire and bio protection — a means of protecting against fire, rot, mold and fungus, wood-boring insects.
For application to new and previously antiseptic-treated wooden rafters, beams, battens, trusses, ceilings, cladding, partitions, walls and other sawn, planed, and chopped structural elements of residential, public, industrial and agricultural buildings.
Protection against:
Fire and bio protection — a means of protecting against fire, rot, mold and fungus, wood-boring insects.
For application to new and previously antiseptic-treated wooden rafters, beams, battens, trusses, ceilings, cladding, partitions, walls and other sawn, planed, and chopped structural elements of residential, public, industrial and agricultural buildings.
Protection against:
- Combustion
- Ignition
- Spread of flames
- Rotting
- Mould
- Blue stain
- Wood-boring insects
Available in a fixed palette of colours:
red
red
Preparing the substrate
- The surface must be cleaned of dirt, dust, bark, bast and other coatings. Surfaces previously painted with enamels, paints and other paint-and-varnish materials must be sanded to restore the wood’s absorbency.
- In case of severe biological contamination, it is recommended to pre-treat with bioprotective agents.
- Application is possible with a brush, roller, dipping, or a pneumatic sprayer (second and subsequent coats) at an air temperature not lower than +10 °C and wood moisture content not exceeding 15%.
- Do not apply to surfaces previously coated with drying oil, paint, varnish, other film-forming or water-repellent materials.
- It is recommended to carry out the work at an air temperature not lower than +10 °C.
- Before starting work, the fire-bio protection should be stirred in the factory container. The product is ready for use.
- The material is applied to the substrate in 2–3 stages using a brush, roller, or sprayer with an interval of 20–40 minutes, ensuring the standardized total consumption in order to achieve the fire-protective properties in accordance with the required group.
- Do not apply to frozen wood! Do not mix with other compounds.
Storage and transportation conditions
Store and transport in the manufacturer’s tightly sealed container separately from food products. After thawing and mixing, the properties remain unchanged. Shelf life in the original factory container — 36 months. Storage temperature from +5°C to +30°C.
Manufacturer’s liability
The manufacturer is not responsible if the work technology with the material is not followed, for its use for purposes and under conditions not provided for in these instructions, and also in the event of adding foreign components and substances to the product composition.
Store and transport in the manufacturer’s tightly sealed container separately from food products. After thawing and mixing, the properties remain unchanged. Shelf life in the original factory container — 36 months. Storage temperature from +5°C to +30°C.
Manufacturer’s liability
The manufacturer is not responsible if the work technology with the material is not followed, for its use for purposes and under conditions not provided for in these instructions, and also in the event of adding foreign components and substances to the product composition.