Purpose:
Bio-protection — a средство для защиты от гниения, плесени, синевы, насекомых-древоточцев in conditions of direct exposure to atmospheric precipitation, soil moisture, hygroscopic and condensation dampening, contact with the ground, both on its own and as a bio-protective primer under paint and varnish materials.

Substrate type:

• New and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, decking, fences, fences/walls, other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rotting
• Mould
• Blue stain
• Wood-boring insects

Properties:

• Difficult to wash off — chemically bonds with wood
• Forms 3 levels of bio-protection in the wood
• Penetrates well into the wood, does not increase its hygroscopicity
• Does not worsen the strength, bonding, and paintability of wood
• Has low corrosive aggressiveness toward ferrous metals
• Preserves the wood grain and does not hinder the wood’s breathing
• Stops bio-infestation that has already begun

Application method:

• Manual (brush, roller with synthetic pile)
• Machine (spray gun)*

*Machine application is possible on an already treated surface with the same composition. Depends on the type of wood and the quality of its surface.

Total consumption when applied with a brush, roller, sprayer:
At least 250-300 g/sq.m*

Consumption when soaking or autoclaving:
60-80 kg/cub.m*

Palette:
Shades of yellow

Composition:
Hard-to-wash-out antiseptic, targeted additives, water

Color:
Shades of yellow

Drying time between coats:
20−40 minutes

Resistance to leaching after:
2−3 days**

Bio-protection service life:
30−35 years under moderate conditions***

Total consumption when applied with a brush, roller, sprayer:
At least 250−300 g/sq.m*

Consumption when soaking or autoclaving:
60-80 kg/cub.m*

*Consumption depends on operating conditions and the required service life of the treated timber.
**When drying under normal conditions.
***Mathematically estimated based on a leach resistance test protocol according to GOST 50 241–2021. All the stated quality indicators and recommendations are valid for an ambient temperature of +20°C and a relative air humidity of 60%. Under other conditions, the material’s technical characteristics may differ from those specified.

Purpose and area of application
Bio-protection – a product for protection against rot, mold, bluestain, and wood-boring insects under conditions of direct exposure to atmospheric precipitation, soil moisture, hygroscopic and condensation wetting, contact with soil, both as a standalone solution and as a bio-protective primer under paints and varnishes (LКM). Hard-to-wash-out antiseptic chemically binds to the wood. Penetrates well into the wood, does not increase its hygroscopicity. Does not impair strength, the bonding ability, and paintability of the wood. Has low corrosive aggressiveness toward ferrous metals.
For application to new and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, decking, fences, enclosures, and other sawn, planed, and hewn structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rotting
• Mould
• Blue stain
• Wood-boring insects

Available in a fixed palette of colours:
Shades of yellow

Storage and transportation conditions
Store and transport in the manufacturer’s tightly sealed container at temperatures from +5°C to +35°C, separately from food products. After thawing and stirring, the properties remain unchanged. Shelf life — 36 months.

Manufacturer’s liability
The manufacturer is not responsible if the work technology with the material is not followed, for its use for purposes and under conditions not provided for in these instructions, and also in the event of adding foreign components and substances to the product composition.