Purpose:
The primer is intended for dust removal, strengthening, and preparing the surface for subsequent finishing (filling, painting, wallpapering).

Type of substrate:
It is used for treating concrete, plastered, gypsum, plasterboard surfaces, as well as chipboard and fibreboard materials.
For indoor and outdoor use.

Application method:

• Brush
• Roller
• Paint sprayer

Consumption:
6−8 m²/l

Palette:
Colourless

Composition:
Polymer water dispersion, functional additives, water, a complex of biocides.

Color:
Colourless

Density:
1,0−1,05 kg/l

MDNV:
Not less than 4%

Recommended number of coats:
1−2

Coverage*:
6−8 m²/l

Drying time**:
2 hours

Air and surface temperature during application:
from +5 °C to +35 °C

*The material consumption depends on the quality of surface preparation, the application method, the tools used, the contractors' qualifications and may differ from the specified values.
** At t (+20±2)°C and relative air humidity not more than (65±5)%. If the temperature decreases or humidity increases, drying time may increase. At an air temperature below +15℃ or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.

Used for processing concrete, plastered, plaster, plasterboard surfaces, particleboard and wood-fiber materials.
For indoor and outdoor use.
The primer can be used in rooms with normal and increased humidity.
Used in all types of buildings and structures (A, B, C).

Colorless

Preparing the substrate
Prepare the surface in accordance with SP 71.13 330.2017.
The surface must be solid, clean, and dry. Before priming, remove from the surface any peeling elements, chalk and lime coatings, dust, and other contaminants.
If the surface is uneven, level it with Bergauf putty, and then sand the dried surface.

Work procedure
The surface to be treated must be dry and clean. During application, the air and substrate temperature must be from +5°C to +35°C, and the relative air humidity must be below 80%.
Before use, mix until homogeneous; do not dilute.
Apply to the prepared, dry, clean surface with a roller, brush, or sprayer (nozzle 0,011−0.015″, pressure no more than 150−170 bar).
For highly absorbent surfaces, it is recommended to prime twice.
Painting of the primed coating is recommended no earlier than after 2−3 hours, provided that the temperature conditions are observed from +5°C and the relative air humidity is no more than 80%.

Safety precautions
Work should be carried out using personal protective equipment for hands, eyes and respiratory protection. Use in well-ventilated areas. If it gets in your eyes, immediately rinse your eyes with water. If it gets on your skin, rinse with water and soap.

Store and transport in a tightly closed container at a temperature from +5°C to +35°C. Five cycles of freezing are permitted with a total duration of no more than 2 weeks at a temperature not lower than -40°C. The bucket with the product should be protected from excessive heating and storage in direct sunlight should be avoided. If the conditions are met, the warranty storage period in the closed factory packaging is 24 months from the date of manufacture. During storage, product separation may occur, which is easily eliminated by stirring. Do not keep an incompletely used product in a tightly closed container and use it " as quickly as possible.
The product is fire- and explosion-safe and contains no flammable components.

Disposal
Do not pour paint and coating products into the sewer system, water bodies, or onto the ground. Dispose of dry, empty containers in accordance with local legislation; pass liquid residues to hazardous waste collection points.