Purpose:
The paint is intended for painting walls and ceilings inside rooms with normal and increased humidity (living rooms, bedrooms, kitchens, bathrooms, dining rooms, corridors) with increased service load, including in children's, preschool, educational, and health-care and preventive institutions. It forms a durable, vapor-permeable coating resistant to light washing with non-abrasive detergents.

Field of application:
The paint can be applied to plasterboard; plastered, previously painted surfaces with water-dispersed paints, as well as plastered, filled, concrete, brick, wooden and tongue-and-groove wood surfaces, particleboard (chipboard), fibreboard, glass-fiber mesh and smooth wall lining (non-woven).
For indoor use.

Application method:

• Brush
• Roller
• Paint sprayer

Consumption:
8−11 m²/kg

Gloss level:
Matte

Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually and using a computer (machine) in colors from RAL, NCS and other color catalogs.

Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.

Color:

• Base A — white.
• Base C — transparent

Sheen level:
Matte

Consumption* for 1 coat on a smooth non-absorbent surface:
8−11 m²/kg

Resistance to wet scrubbing GOST 32 300/ DIN EN 13 300:
Class 2

Density:
Base, A approx. 1.56 kg/l
Base C approx. 1.4 kg/l

VOC:
Base A at least 55%
Base C at least 55%

Thinner:
Water

Drying time “to the touch"**:
1 hour

The next coat can be applied after:
1.5 hours

Washability:
Easy cleaning with non-abrasive detergents, no earlier than 2 weeks after application

Air and substrates when used:
from +5 °C to +35 °C


* Material consumption depends on the quality of surface preparation and the absorbency of the surface, the application method, the tool used, the skill level of the contractors and may differ from the specified values.
** At T (+20±2)°C and relative air humidity not more than (65±5)%. When temperature decreases or humidity increases, drying time may increase. At air temperature below +15°C or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.

The paint can be applied to plasterboard; plastered, previously painted surfaces with water-dispersed paints, as well as plastered, filled, concrete, brick, wooden and tongue-and-groove wood surfaces, particleboard (chipboard), fibreboard, glass-fiber mesh and smooth wall lining (non-woven).
For indoor use.
For manual and mechanized application.
Used in all types of buildings and structures (A, B, C).

The paint is supplied in two bases: A (pastel colors) and C (saturated colors) and can be computer-tinted (machine-tinted) to colors RAL, NCS and other color catalogs. Manual tinting with tinting pastes on a water-based basis is possible. Base A can be used as white paint; base C is used only in tinted form.
The organization performing the tinting is responsible for the tinting result.

Depending on the application conditions and the texture of the painted surface, the actual color shades may differ slightly from those shown in the color catalog.
Before use, perform a test application and check the dried coating for color conformity.
After adding tinting pastes, the product should be used within the shortest possible time to avoid changes in the properties of the tinted material during storage.

To avoid differences in shade, it is recommended that on one visible surface you use a product from a single production batch (batch number is indicated on each package) or pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.

SURFACE PREPARATION
Prepare the surface in accordance with SP 71.13 330.2017.
Clean the surface from dust and dirt. On previously painted surfaces, remove loose layers of old paint and limewash. Sand hard and firmly adhering glossy surfaces until they become matte; remove dust from sanding. Level out unevenness, pits, cracks and chips with putty Bergauf, sand until smooth.
Surfaces previously coated with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with a Praktik strengthening primer under paint to increase the reliability of the coating and reduce paint consumption.

WORK PROCEDURE
Thoroughly mix the paint. The paint is ready for use; if necessary, it can be diluted with water by no more than 5%. Apply the paint to the prepared, dry, clean surface using a roller, brush or paint sprayer in two coats. For rough surfaces (textured plasters, brick, concrete blocks, embossed ceilings) it is recommended to use rollers with a pile length of 12−25 mm. For rough surfaces (putty, plaster, concrete) — with a pile length of 8−12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decor elements (trim, mouldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water of 5−10% is permitted, nozzle 0,013−0,015″, pressure 180−190 bar. During work avoid exposure to direct sunlight, conditions of increased humidity, and contact with atmospheric precipitation. When applying, the air and substrate temperature is from +5°C up to +35°C, relative air humidity below 80%.
After completion of work, wash hands and tools thoroughly with warm water.

SAFETY INSTRUCTIONS
The work should be carried out using personal protective equipment for hands, eyes, and respiratory protection. Use in well-ventilated premises. In case of contact with eyes, rinse immediately with water. In case of contact with skin, rinse with water and soap.

STORAGE AND TRANSPORT
Store and transport in tightly closed containers at a temperature from +5°C to +35°C. Up to fivefold freezing with a total duration of no more than 2 weeks is allowed at a temperature not lower than -40°C. The product bucket should be protected from excessive heating and stored away from direct sunlight. If the conditions are met, the guaranteed shelf life in a closed factory package is 24 months from the date of manufacture. During storage, product separation may occur; it is easily eliminated by stirring. Do not keep the product that has not been used up completely in a tightly closed container and use it " as quickly as possible.
The product is fire- and explosion-safe and does not contain flammable components.

DISPOSAL
Do not pour paint and coating products into the sewer system, water bodies, or onto the ground. Dispose of dry, empty containers in accordance with local legislation; pass liquid residues to hazardous waste collection points.