Interior paints, decorative plasters, and textured coatings for painting walls, ceilings, partitions, and other surfaces inside buildings.
PAINT AND COATING MATERIALS FOR INDOOR WORK
A wide range of products to bring your ideas to life
Materials for areas with normal and elevated humidity
Tinting in thousands of colors according to Ral, NCS and other color catalogs
Computer color matching
Eco-friendly, hypoallergenic
Easy to apply and spread evenly
Snow-white matte
No odor, water-based
PRAKTIK interior paint
Packaging:
Water-dispersed polyacrylic paint for interior use
Download specifications
The product is available until July 2026.
Purpose:
Paint for painting walls and ceilings inside rooms with normal humidity. The paint is ready to use.
Substrate type:
4−7 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL, and other tinting systems.
Purpose:
Paint for painting walls and ceilings inside rooms with normal humidity. The paint is ready to use.
Substrate type:
- Concrete, brick, fibreboard and chipboard panels, plasterboard (GKL), plastered, previously painted surfaces (not glossy), glass-fibre mesh and smooth painter’s flizel
- Brush
- Roller
- Paint sprayer
4−7 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL, and other tinting systems.
Composition:
Polyacrylic dispersion (latex), pigments, fillers, targeted additives, water.
Color:
Base A — white
Sheen level:
Matte
Coverage per 1 coat on a smooth non-absorbent surface:
5−7 m²/kg
Coverage per 1 coat on an uneven absorbent surface:
4−6 m²/kg
Density:
about 1.5 kg/l
NVMC:
55%
Drying time to grade 3**:
0.5 hours
The next coat can be applied after**:
1 hour**
Washability:
Cleaning with a dry non-abrasive sponge or brush with soft bristles
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of surface preparation, application method, the tool used, the skill level of installers, and may differ from the values stated.
** at t +20±2 °C and relative air humidity of no more than 65±5%.
When the temperature decreases or humidity increases, drying time may increase. At an air temperature below +15°C or
relative air humidity above 65%, the next coat should be applied no earlier than after 24 hours.
Polyacrylic dispersion (latex), pigments, fillers, targeted additives, water.
Color:
Base A — white
Sheen level:
Matte
Coverage per 1 coat on a smooth non-absorbent surface:
5−7 m²/kg
Coverage per 1 coat on an uneven absorbent surface:
4−6 m²/kg
Density:
about 1.5 kg/l
NVMC:
55%
Drying time to grade 3**:
0.5 hours
The next coat can be applied after**:
1 hour**
Washability:
Cleaning with a dry non-abrasive sponge or brush with soft bristles
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of surface preparation, application method, the tool used, the skill level of installers, and may differ from the values stated.
** at t +20±2 °C and relative air humidity of no more than 65±5%.
When the temperature decreases or humidity increases, drying time may increase. At an air temperature below +15°C or
relative air humidity above 65%, the next coat should be applied no earlier than after 24 hours.
Purpose and properties
Intended for painting walls and ceilings inside premises with normal humidity. The paint is ready to use. Easy to apply, dries quickly, and has no strong odor. After drying, it forms a smooth matte surface.
Features good decorative properties, hiding power, and strong adhesion to the surface being painted. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Hand tinting is possible using tinting pastes on a water-based basis.
Application area
The paint can be applied to concrete, brick, fiberboard, and chipboard, plasterboard (gypsum board), plastered, previously painted surfaces (not glossy), fiberglass mesh, and smooth painting non-woven fabric. For manual and mechanized application.
May be used in buildings and structures:
Intended for painting walls and ceilings inside premises with normal humidity. The paint is ready to use. Easy to apply, dries quickly, and has no strong odor. After drying, it forms a smooth matte surface.
Features good decorative properties, hiding power, and strong adhesion to the surface being painted. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Hand tinting is possible using tinting pastes on a water-based basis.
Application area
The paint can be applied to concrete, brick, fiberboard, and chipboard, plasterboard (gypsum board), plastered, previously painted surfaces (not glossy), fiberglass mesh, and smooth painting non-woven fabric. For manual and mechanized application.
May be used in buildings and structures:
- Type A — residential buildings and dormitories; buildings and premises of organizations for the upbringing and education, rest and health improvement of children and youth; healthcare organizations; homes for people with disabilities and the elderly; boarding houses; holiday homes; closed sports facilities; utility rooms with continuous occupancy by people in administration buildings at industrial enterprises and other facilities of types B, V;
- Type B — enterprises of the food industry, trade and public catering; hotels; stores selling general merchandise; communications enterprises; domestic service enterprises; cultural, entertainment and other facilities; administrative buildings;
- Type V — industrial enterprises, auxiliary and domestic premises and structures; warehouses; garages.
The paint is supplied as Base A and can be tinted using a computer (machine) method. Base A is intended for tinting into light and pastel shades; it can also be used as white paint.
The paint can be tinted in accordance with NCS, RAL and other tinting systems; it is acceptable to add up to 5% tinting pastes by weight of the paint.
Manual tinting with water-based tinting pastes is also possible. To avoid differences in shade on the same surface, use a product with the same batch number (see on the package) or pre-mix materials from different batches in a 1:1 ratio. The organization carrying out the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface to be painted, the actual color shades may differ slightly from those shown in the color catalog. Before use, it is necessary to apply a test coat and check the dried coating for color conformity.
After adding tinting pastes, the product should be used within the shortest possible time to avoid changes in the properties of the tinted material during storage.
The paint can be tinted in accordance with NCS, RAL and other tinting systems; it is acceptable to add up to 5% tinting pastes by weight of the paint.
Manual tinting with water-based tinting pastes is also possible. To avoid differences in shade on the same surface, use a product with the same batch number (see on the package) or pre-mix materials from different batches in a 1:1 ratio. The organization carrying out the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface to be painted, the actual color shades may differ slightly from those shown in the color catalog. Before use, it is necessary to apply a test coat and check the dried coating for color conformity.
After adding tinting pastes, the product should be used within the shortest possible time to avoid changes in the properties of the tinted material during storage.
Surface preparation
Prepare the surface in accordance with SP 71.13 330.2017. Clean the surface from dust and dirt. From previously painted surfaces, remove weakly adhering layers of old paint and whitewash. Sand solid and firmly adhering glossy surfaces until matte, and remove sanding dust.
Level unevenness, hollows, cracks and chips with a water-dispersed putty Bergauf UNI PASTA, then sand. Surfaces previously coated with chalk or lime paints must be thoroughly cleaned until completely removed.
Highly absorbent surfaces should be pre-primed to improve coating reliability and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of base).
Prepare the surface in accordance with SP 71.13 330.2017. Clean the surface from dust and dirt. From previously painted surfaces, remove weakly adhering layers of old paint and whitewash. Sand solid and firmly adhering glossy surfaces until matte, and remove sanding dust.
Level unevenness, hollows, cracks and chips with a water-dispersed putty Bergauf UNI PASTA, then sand. Surfaces previously coated with chalk or lime paints must be thoroughly cleaned until completely removed.
Highly absorbent surfaces should be pre-primed to improve coating reliability and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of base).
Storage and transportation conditions
Store and transport in tightly sealed containers at a temperature of not less than +5° and not more than +35°С. Up to five freeze-thaw cycles are permitted for a total duration of no more than 2 weeks at a temperature not below -40°С.
Protect the bucket with the product from excessive heating and avoid storing in direct sunlight. If the conditions are met, the warranty storage period in a closed factory package is 24 months from the date of manufacture.
During storage, the product may separate, which is easily resolved by stirring. Do not keep an incompletely used product in a tightly sealed container and use it within the shortest possible time.
Safety
The product is fire- and explosion-safe and contains no flammable components.
Store and transport in tightly sealed containers at a temperature of not less than +5° and not more than +35°С. Up to five freeze-thaw cycles are permitted for a total duration of no more than 2 weeks at a temperature not below -40°С.
Protect the bucket with the product from excessive heating and avoid storing in direct sunlight. If the conditions are met, the warranty storage period in a closed factory package is 24 months from the date of manufacture.
During storage, the product may separate, which is easily resolved by stirring. Do not keep an incompletely used product in a tightly sealed container and use it within the shortest possible time.
Safety
The product is fire- and explosion-safe and contains no flammable components.