Purpose:
Paint for tiles, PVC and concrete.

Substrate type:

• Ceramic tile
• Porcelain stoneware
• PVC
• Laminate, linoleum
• Previously painted or varnished wood
• Natural stone
• Concrete and any mineral substrates

Application method:

• Brush
• Roller
• Paint sprayer

Consumption:
8-12 m²/l

Gloss level:
Semi-matte (10-20%)

Tinting:
The paint is produced in two bases, A (white) and C (transparent). It can be tinted manually and using a computer (machine) in colors from RAL, NCS and other color catalogs.

Composition:
Modified dispersion of a styrene-acrylic copolymer, titanium dioxide, fillers, biocides, functional additives, water.

Color:
Base, A — white; Base C — transparent

Sheen level:
Semi-matte (10-20%)

Coverage per coat:
8-12 m²/l*

Drying time:
1 hour**

Intercoat drying time:
2-3 hours**

Washability:
Wet cleaning with non-abrasive detergents.

Resistance to wet scrubbing GOST 32 300/ DIN EN 13 300:
Class 1

Surface temperature during application:
+5 °C to 35 °C

Shelf life:
24 months

* Material consumption depends on the quality of surface preparation, the method of application, the tool used, the contractors’ qualifications, and may differ from the values indicated.
** At t (+20±2)°C and relative air humidity not more than (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At an air temperature below +15°C or relative air humidity above 65%, the next coat should be applied no earlier than after 24 hours.

A semi-matte universal water-based paint for interior use; specially designed for painting complex smooth surfaces. Provides a long-lasting and elastic coating resistant to moisture and
to mechanical damage. It has high adhesion and an antibacterial protective coating.
Ideal for refreshing interior spaces, including damp areas (bathroom, kitchen).

Application area
Used for painting ceramic tiles, porcelain tiles, PVC, laminate, linoleum, previously painted or varnished wood, natural stone, concrete, and any mineral substrates.

The paint is supplied in two bases, A and C, and can be computer-tinted (machine-tinted) to colors RAL, NCS, and other color catalog shades. Base A is intended for tinting into light and pastel tones; it can also be used as white paint. It is permissible to add up to 5% tinting pastes by paint mass.
Base C is used only in tinted form and is intended for tinting into saturated shades; it is permissible to add up to 10% tinting pastes by paint mass. When painting in bright colors on Base C, it is recommended to first apply a coat of Base A paint tinted to a similar shade. Manual tinting is possible using tinting pastes on a water base.
The organization performing the tinting is responsible for the tinting result. Depending on the application conditions and the texture of the painted surface, the actual color shades may differ slightly from those shown in the color catalog.
Before use, it is necessary to perform a test application and check the dried coating for color conformity.
To avoid differences in shade, it is recommended that, on the same visual plane, you use a product from a single production batch (batch number is indicated on each package) or mix materials from different batches in a 1:1 ratio in advance; the application method should remain unchanged.
must remain unchanged.

Surface preparation:

• Clean the substrate of dust and dirt. On previously painted surfaces, remove loose layers of old paint and whitewash. Level out unevenness, depressions, cracks, and chips with a water-dispersed putty, then sand.
• Pre-wash the surface to be painted with water using detergents; rinse the seams on ceramic tile especially thoroughly, then allow the surface to dry. If there is mold on the surface, treat it with an antiseptic solution. Smooth high-gloss, shiny surfaces are recommended to be pre-sanded and degreased to improve adhesion.
• Intensely absorbent mineral surfaces should be primed in advance with a deep-penetration primer Bergauf Techno Primer to improve the reliability of the coating and reduce paint consumption.

Working procedure:
The surface to be painted must be dry and clean; air temperature and the base for performing the work: from +5°C to +35°C; relative air humidity below 80%.
Before use, mix the paint thoroughly.
Mixing must be done with a wide, flat paddle or a construction mixer at low speeds, carefully, without allowing the formation of air bubbles, for 1–3 minutes. It is not recommended to mix
the material by shaking a closed can. After transportation and/or active mixing, if air bubbles occur, the paint needs to stand until they disappear. Apply to the prepared, dry, clean surface with a brush, roller, or paint sprayer,
carefully painting over uneven areas and corners in 1–2 coats.
For smooth surfaces, it is recommended to use rollers with a pile length of up to 6 mm. If necessary, thin with clean water, no more than 5% of the paint volume.
To avoid differences in the shade of the finish coat, it is recommended to use paint from the same batch or to mix the required amount in one container.
After finishing the work, thoroughly wash hands and tools with warm water.

Safety precautions
Do not mix with other paints and thinners.
Work should be carried out using personal protective equipment for hands, eyes, and respiratory protection. Use in well-ventilated areas. If it gets into your eyes, rinse your eyes immediately with water. If it gets on your skin, wash with water and soap. Keep out of the reach of children!

Store and transport in tightly sealed containers at temperatures from +5°C to +35°C. Up to five cycles of freezing are allowed with a total duration of no more than 2 weeks at temperatures not below -40°C. The product bucket should be protected from excessive heating and storage in direct sunlight should be avoided. If the conditions are met, the warranty storage period in the closed original factory packaging is 24 months from the date of manufacture.
During storage, the product may separate; this can be easily corrected by mixing. Do not keep the product that has not been fully used in a tightly sealed container and use it as soon as possible.
The product is fire- and explosion-safe and does not contain flammable components.