Bergauf silicone, silicate, and complex-adhesion paints for façades, plinths, and any other exterior surfaces.
Paints and coatings for outdoor work
Paints tested for compatibility in the system
Provide an excellent combination of durability and aesthetics
Reliably protect against moisture, sunlight, and sharp temperature fluctuations
Has no sharp smell
Easy to apply, dries quickly
Computer color matching
Weather-resistant, vapor-permeable
Excellent adhesion
PRAKTIK paint. Facades
Packaging:
Weather-resistant paint for exterior use
Download specifications
Intended use:
The paint is intended for painting mineral facades of residential and administrative buildings, as well as walls and ceilings in rooms with normal and increased humidity. Creates a coating resistant to weather conditions and biological damage.
Type of substrate:
The paint can be applied to new and previously painted mineral surfaces with water-dispersed paints, plastered, filled, concrete, brick, asbestos-cement surfaces, as well as drywall, fibreboard, chipboard that are exposed to weather conditions and used indoors. Do not apply to surfaces painted with lime silicate paints and organic elastic coatings.
Application method:
Consumption:
8−11 m²/l
Gloss level:
Matte
Tinting:
The paint is available in two bases, A and C, and can be tinted by computer (machine) to colors RAL, NCS and other color catalogs.
The paint is intended for painting mineral facades of residential and administrative buildings, as well as walls and ceilings in rooms with normal and increased humidity. Creates a coating resistant to weather conditions and biological damage.
Type of substrate:
The paint can be applied to new and previously painted mineral surfaces with water-dispersed paints, plastered, filled, concrete, brick, asbestos-cement surfaces, as well as drywall, fibreboard, chipboard that are exposed to weather conditions and used indoors. Do not apply to surfaces painted with lime silicate paints and organic elastic coatings.
Application method:
- Brush
- Roller
- Paint sprayer
Consumption:
8−11 m²/l
Gloss level:
Matte
Tinting:
The paint is available in two bases, A and C, and can be tinted by computer (machine) to colors RAL, NCS and other color catalogs.
Composition:
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
Base A — white. Base C — transparent
Base:
A/C
Gloss level:
Matte
Coverage per coat on a non-absorbent surface:
8−11 m²/kg*
Density:
Base A, 1.5−1.55 kg/l
Base C, 1.35−1.4 kg/l
Drying time «to the touch»:
1 hour**
The next coat can be applied after:
1 hour**
Washability:
Cleaning with non-abrasive detergents, no earlier than 2 weeks after application
Water absorption GOST 33 352:
less than 0.1 kg/(m2*ч0.5), class W3
Vapor permeability resistance GOST 25 898:
less than 0.15 m2*ч*Pa/mg
Surface temperature during application:
From +5 to +35ºC
*The material consumption depends on the quality of surface preparation and the absorbency of the substrate, the application method, the tools used, the qualifications of the applicators, and may differ from the stated values.
** At t (+20±2)°C and relative air humidity not more than (65±5)%. If the temperature decreases or humidity increases, drying time may increase. At an air temperature below +15℃ or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Polymer dispersion, pigments, fillers, functional additives, biocides, water.
Color:
Base A — white. Base C — transparent
Base:
A/C
Gloss level:
Matte
Coverage per coat on a non-absorbent surface:
8−11 m²/kg*
Density:
Base A, 1.5−1.55 kg/l
Base C, 1.35−1.4 kg/l
Drying time «to the touch»:
1 hour**
The next coat can be applied after:
1 hour**
Washability:
Cleaning with non-abrasive detergents, no earlier than 2 weeks after application
Water absorption GOST 33 352:
less than 0.1 kg/(m2*ч0.5), class W3
Vapor permeability resistance GOST 25 898:
less than 0.15 m2*ч*Pa/mg
Surface temperature during application:
From +5 to +35ºC
*The material consumption depends on the quality of surface preparation and the absorbency of the substrate, the application method, the tools used, the qualifications of the applicators, and may differ from the stated values.
** At t (+20±2)°C and relative air humidity not more than (65±5)%. If the temperature decreases or humidity increases, drying time may increase. At an air temperature below +15℃ or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
The paint is intended for painting facades of residential and administrative buildings. The paint can be applied to surfaces made of brick, concrete, asbestos-cement, plastered and previously painted surfaces exposed to weathering, as well as surfaces used indoors to obtain coatings resistant to damp cleaning and washing.
The paint can be applied to concrete, brick, fibreboard and wood-chip boards, plasterboard (GКL), plastered, previously painted surfaces (but not glossy). Not recommended for painting plinths (socles/bases).
For manual and mechanized application.
The paint can be applied to concrete, brick, fibreboard and wood-chip boards, plasterboard (GКL), plastered, previously painted surfaces (but not glossy). Not recommended for painting plinths (socles/bases).
For manual and mechanized application.
The paint is supplied in two bases: A (pastel colors) and C (saturated colors) and can be computer-tinted (machine-tinted) to colors RAL, NCS and other color catalogs. Manual tinting with tinting pastes on a water-based basis is possible. Base A can be used as white paint; base C is used only in tinted form.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions and the texture of the painted surface, the actual color shades may differ slightly from those shown in the color catalog.
Before use, a test application must be carried out and the dried coating must be checked for color conformity.
After adding tinting pastes, the product should be used within the shortest possible time to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended that on one visual surface you use a product from the same production batch (the batch number is indicated on each package) or pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions and the texture of the painted surface, the actual color shades may differ slightly from those shown in the color catalog.
Before use, a test application must be carried out and the dried coating must be checked for color conformity.
After adding tinting pastes, the product should be used within the shortest possible time to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended that on one visual surface you use a product from the same production batch (the batch number is indicated on each package) or pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
SURFACE PREPARATION
Perform the surface preparation in accordance with SP 71.13 330.2017.
Clean the surface base from dust and dirt. On previously painted surfaces, remove loose layers of old paint and limewash. Sand hard and firmly adhering glossy surfaces until they become matte; remove dust from sanding. Level out unevenness, cavities, cracks and chips with putty Bergauf, sand it.
Surfaces previously coated with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with Praktik reinforcing primer for painting to improve coating reliability and reduce paint consumption.
WORK PROCEDURE
Thoroughly mix the paint. The paint is ready to use; if necessary, it may be diluted with water by no more than 5%. Apply the paint to a prepared, dry, clean surface using a roller, brush, or a paint sprayer. For rough surfaces (textured plaster, brick, concrete blocks, embossed ceilings), it is recommended to use rollers with a pile length of 12–25 mm. For rough surfaces (fillers, plaster, concrete) — with a pile length of 8–12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decorative elements (fascias, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water of 5–10% is allowed, nozzle 0.013–0.015″, pressure 180–190 bar. When carrying out the work, avoid exposure to direct sunlight, conditions of high humidity, and precipitation. Air and substrate temperature during application from +5°C to +35°C, relative air humidity below 80%.
To obtain a rich colour and improve the appearance of the surface, apply two coats of paint. To avoid differences in shade, use paint from the same batch. It is recommended not to make interruptions when painting a continuous surface; at the areas of “overlap”, work using the “wet-on-wet” method. Finish the work at architectural boundaries (at the building corners, under rain gutter pipes, etc.).
After finishing the work, wash your hands and tools thoroughly with warm water.
SAFETY INSTRUCTIONS
Work should be carried out using personal protective equipment for hands, eyes and respiratory protection. Use in well-ventilated areas. If it gets in your eyes, immediately rinse your eyes with water. If it gets on your skin, rinse with water and soap.
Perform the surface preparation in accordance with SP 71.13 330.2017.
Clean the surface base from dust and dirt. On previously painted surfaces, remove loose layers of old paint and limewash. Sand hard and firmly adhering glossy surfaces until they become matte; remove dust from sanding. Level out unevenness, cavities, cracks and chips with putty Bergauf, sand it.
Surfaces previously coated with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with Praktik reinforcing primer for painting to improve coating reliability and reduce paint consumption.
WORK PROCEDURE
Thoroughly mix the paint. The paint is ready to use; if necessary, it may be diluted with water by no more than 5%. Apply the paint to a prepared, dry, clean surface using a roller, brush, or a paint sprayer. For rough surfaces (textured plaster, brick, concrete blocks, embossed ceilings), it is recommended to use rollers with a pile length of 12–25 mm. For rough surfaces (fillers, plaster, concrete) — with a pile length of 8–12 mm. For smooth surfaces (drywall, MDF, chipboard, architectural decorative elements (fascias, moldings, ceiling cornices)) — with a pile length of up to 6 mm. For airless spraying, dilution with water of 5–10% is allowed, nozzle 0.013–0.015″, pressure 180–190 bar. When carrying out the work, avoid exposure to direct sunlight, conditions of high humidity, and precipitation. Air and substrate temperature during application from +5°C to +35°C, relative air humidity below 80%.
To obtain a rich colour and improve the appearance of the surface, apply two coats of paint. To avoid differences in shade, use paint from the same batch. It is recommended not to make interruptions when painting a continuous surface; at the areas of “overlap”, work using the “wet-on-wet” method. Finish the work at architectural boundaries (at the building corners, under rain gutter pipes, etc.).
After finishing the work, wash your hands and tools thoroughly with warm water.
SAFETY INSTRUCTIONS
Work should be carried out using personal protective equipment for hands, eyes and respiratory protection. Use in well-ventilated areas. If it gets in your eyes, immediately rinse your eyes with water. If it gets on your skin, rinse with water and soap.
STORAGE AND TRANSPORT
Store and transport in tightly closed containers at a temperature from +5°C to +35°C. Up to fivefold freezing with a total duration of no more than 2 weeks is allowed at a temperature not lower than -40°C. The product bucket should be protected from excessive heating and stored away from direct sunlight. If the conditions are met, the guaranteed shelf life in a closed factory package is 24 months from the date of manufacture. During storage, product separation may occur; it is easily eliminated by stirring. Do not keep the product that has not been used up completely in a tightly closed container and use it " as quickly as possible.
The product is fire- and explosion-safe and does not contain flammable components.
DISPOSAL
Do not pour paint and coating products into the sewer system, water bodies, or onto the ground. Dispose of dry, empty containers in accordance with local legislation; pass liquid residues to hazardous waste collection points.
Store and transport in tightly closed containers at a temperature from +5°C to +35°C. Up to fivefold freezing with a total duration of no more than 2 weeks is allowed at a temperature not lower than -40°C. The product bucket should be protected from excessive heating and stored away from direct sunlight. If the conditions are met, the guaranteed shelf life in a closed factory package is 24 months from the date of manufacture. During storage, product separation may occur; it is easily eliminated by stirring. Do not keep the product that has not been used up completely in a tightly closed container and use it " as quickly as possible.
The product is fire- and explosion-safe and does not contain flammable components.
DISPOSAL
Do not pour paint and coating products into the sewer system, water bodies, or onto the ground. Dispose of dry, empty containers in accordance with local legislation; pass liquid residues to hazardous waste collection points.