Purpose:
Ready-to-use acrylic plaster with a decorative textured effect for use in façade thermal insulation systems based on mineral wool and polystyrene, as well as for interior finishing in dry and wet premises in buildings and structures. Fraction 2 mm.

Substrate type:

• Reinforced base plaster coat.
• Concrete, reinforced concrete, cellular concrete.
• Cement-sand, cement-lime plasters.
• Gypsum plasters.
• Cement putties.
• Sheet materials containing gypsum, cement, wood.

Application method:

• Manual and mechanized

Consumption:
3,3−3,5 kg/m2

Tinting:
The plaster is supplied as a base and can be tinted manually and by computer (machine) in the colors of RAL, NCS and other color catalogs.

Composition:
Styrene-acrylic dispersion, pigments, fillers, functional additives, water.

Color:
White**

Density:
1.9 kg/l

Fraction:
2 mm

Consumption per 1 m²*:
3.3–3.5 kg

Application thickness:
2 mm

Drying time to degree 3:
No more than 5 hours***

Resistance to atmospheric precipitation:
No earlier than after 24 hours

Subsequent work:
After 3 days

Shelf life:
24 months

* Material consumption depends on the quality of surface preparation, the method of application, the tool used, the contractors’ qualifications, and may differ from the values indicated.
** Some content of particles that differ from the base color is permitted, which does not affect the product's technical characteristics. This is explained by the presence in the composition of fillers of natural origin.
*** The stated quality indicators and recommendations are valid for an ambient temperature of +20°C and a relative air humidity of 60%. Under other conditions, drying time and adjustments may differ from those stated.

High-quality ready-to-use acrylic plaster for use in facade thermal insulation systems based on mineral wool and expanded polystyrene (excluding plinths), as well as for finishing indoors in dry and damp rooms in buildings and structures of types A, B, and C.
Colorable in pastel and intense colors. Resistant to shrinkage crack formation. Easy to apply and structure. Durable and weather-resistant. Vapor-permeable.

Substrate type:

• Reinforced base plaster coat.
• Concrete, reinforced concrete, cellular concrete.
• Cement-sand, cement-lime plasters.
• Gypsum plasters.
• Cement putties.
• Sheet materials containing gypsum, cement, wood.

Tinting
The decorative plaster is supplied as a base and can be color-matched by computer (machine) to colors from the RAL, NCS and other color catalogs. Manual color-matching is also possible using colorants based on water, which have high light and weather resistance. It is recommended to add no more than 5% colorant, since overdosing it adversely affects the strength and the workability of applying the coating.
The organization performing the tinting is responsible for the tinting result.

Color rendering characteristics
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those shown in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color conformity.
To avoid differences in shade, it is recommended that on one visible surface you use a product from a single production batch (batch number is indicated on each package) or pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.

Color recommendations
BERGAUF FACADE GRUNT primer is recommended to be applied in a color close to the color of the plaster being used.
Application on facades of materials in intense or dark colors with a reflection coefficient of less than 25% should be limited to small surfaces occupying no more than 10% of the facade, for example, individual architectural details.

Application technique
Work must be carried out in accordance with SP 293.1 325 800.2017.
Before applying the plaster, it must be thoroughly mixed, as during storage the product may separate. Thinning the plaster with water is allowed in an amount of no more than 5% of the material’s mass.
Apply the plaster with a stainless-steel trowel at a 60° angle to the surface; the coating thickness must match the plaster grain size. Within 25–35 minutes (depending on temperature and humidity) after application (the material will stop sticking to the tool), create the required texture using a plastic trowel. Hold the plastic trowel parallel to the surface and form the texture with light strokes, without pressing.
The “pebble-like” texture is formed with small circular trowel movements directed in one direction, as a rule counterclockwise.

Features of performing the work
If it is necessary to stop work, masking tape is applied along the boundary of the plaster layer; it must be removed before the plaster hardens. To obtain a uniform texture, ensure a sufficient number of workers at each level of the scaffolding and perform the connection of sections between adjacent levels using the «wet-on-wet» method.
After application, in the first 2−3 days, decorative plaster should be protected from direct sunlight, wind, and rain. Under such conditions, it is recommended to cover the scaffolding with a special mesh or film, and to install drip edges on the building. Do not allow freezing or drying out.
Interior finishing should be carried out only in well-ventilated rooms, and after the work is completed, maintain air circulation until the coating is completely dry.

Subsequent work
To color the surface of decorative plaster, it is recommended to use acrylic, silicone, or silicate paints. Painting is carried out no earlier than after 3–5 days, depending on the environmental conditions.

Tinting

• Tinting is possible using water-based tinting pastes with high resistance to light and atmospheric conditions, in accordance with NCS, RAL and other tinting systems. Depending on the application conditions, as well as the texture of the surface being painted, the actual shades of the colors may differ slightly from those shown in the color catalog.
• It is recommended to add no more than 5% of the tinting agent, since overdosing it negatively affects the strength and workability of applying the coating. To avoid color variation, it is recommended to use a product from the same production batch on one surface (batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.
• The organization carrying out the tinting is responsible for the tinting result. Before use, a test application must be performed and the dried coating must be checked for color conformity.

Color recommendations
The primer «Bergauf FACADE GRUNT» is recommended to be used in a color close to the color of the plaster used.
Use on facades of materials in intense or dark colors with a reflection coefficient of less than 25% should be limited to small areas occupying no more than 10% of the facade, for example, individual architectural details.

Cleaning the tools
Clean tools with water immediately after use. If the tools were not cleaned immediately, they can then only be cleaned mechanically.

Limitations
It is forbidden to work in atmospheric precipitation, fog, as well as on wet surfaces after rain and at temperatures below +5°С and above +35 °C.

Safety
Attention! The product is fire- and explosion-safe and does not contain flammable components.

Storage and transportation conditions
When warranty conditions are met, the warranty storage period in a sealed factory package is 12 months from the date of manufacture. Store and transport in tightly closed containers at a temperature of at least +5° C and not more than +30° C. The bucket with the product should be protected from excessive heating and storage under direct sunlight should be avoided.
Up to 5 freeze-thaw cycles with a total duration of no more than three weeks at a temperature not lower than minus 20° C is permitted.